Your mower tires may be repaired or replaced with little fuss and little expense.

Use: Front mower tires 11x4.00-5 replacement (check sidewall); not for highway speeds

11x4.00-5 tube type tire Pneumatic smooth tread, 2 ply rating; check your current tire Sidewall

Two 1/4" nylon spacers, two 1/2" nylon spacers, and two steel washers are included in the universal adapter kit.

Wheel: 3.4" CENTERED hub, 3/4" sintered iron bushings, solid gray steel construction.#

These were purchased to swap out the Ariens/Gravely zero turn's front swivel wheels. The hub dimensions were different than anticipated, but the hub still fit since plastic spacers and metal washers were used. With the spacers, a 5" axle could fit in the arrangement, which was most likely a 4" hub. On my equipment, I dislike anything made of plastic. They receive a 4 star rating as a result. They would have received five stars if the spacers had been made of metal and the hub size was precise. Still a nice deal considering the cost.

only use a hand pump to inflate.

pneumatic tyre, which is inflated. Tread with ribs.

Not for use on highways.

4.80/4.00-8" Tire. Tire Diameter of 15.5"

attaches to an 8" rim.#

Because there were so many negative reviews, I was hesitant to purchase these tires and tubes. In the end, I bought 4 of them because the price was just too wonderful to refuse. They're fantastic, so I'm pleased I did. Tires made of actual rubber instead of plastic were what I had anticipated. Surprisingly thick were the inner tubes. (Skip trying to attach these without tubes. Why do you suppose they are shipped in tubes? In the chilly weather, I had a little issue physically putting them on my rims, but some silicone spray made it lot simpler. In a working horse barn, these tires were put to use on two Groundwork wheel barrows with dual wheels. Every day, they are utilized for hours. I had the opportunity to see my tires today while I was back there (4 weeks later). They still have a brand-new appearance and no air pressure loss. That some consumers have had negative experiences with these tires is regrettable. I don't belong with them.

Tire has a maximum load capacity of 515 pounds and high durability.

tight-fitting tread blocks that offer excellent traction and balance.

Pneumatic Air Filled Tire is the ideal option for your riding lawnmower because it can be filled to 10 psi and has a 2 ply construction.

Little harm is done to your grass, turf, and equipment because to the wide shoulder design.

Dimensions: 18.5-8.8 inches#

These tires have been performing well on the lawn mower, and we have had no problems with them. They did not appear worn out or old. Since the rubber is solid, it would have been difficult to do it ourselves, so we had a shop do it. They should outlive the life of the passed-down riding mower, so even though I would buy them again, I doubt I will have to.One of the tires was little deformed, but they shipped and came swiftly overall. Its installation or use were unaffected by this.

Your riding mower tires may be repaired or replaced with little fuss and little expense.

Wheel: 3" Centered Hub, 3/4" Sintered Iron Bushings, Solid Dark Gray Steel

Use: Alternate for Craftsman Riding Mowers with 15x6 Front Tires. 00-6

400 lbs. load capacity; 400 mph; not for highway speeds

Check the sidewall of your current tire for this tire size: 15x6.00-6 Tube-Type Turf Saver Tread - Pneumatic 4 Ply Rating.

To ensure a perfect replacement fit, measure your present tire's sidewall for the tire, hub, and bushing sizes.#

Fit: Professional 54" deck, 26 horsepower. It's too early to tell, but the actual rubber tire compound appears to be in the center of the pack. We'll keep you updated. One of the wheels has a bent edge and flange on both sides. These tubes are installed / tube type, as stated in the product description. The wheels exceeded expectations and were of OEM grade, not a lower one. The valve stem improvement for mounting the grease gun was on the same side as the zerk grease fitting. The zerk grease fitting is located on the backside of OEM wheels. Expectations for the pricing are reasonable and acceptable. After checkout, the order's delivery window appeared to be around two months; however, this changed for the better, and Amazon delivered the items in record time, and the tire and wheel combination successfully completed its first mow. I was on the fence because of some of the Amazon community's evaluations, but until something strange occurs, I would make another buy.

A strict 100% quality control examination is completed on each tube.

Straight valve stem for TR13

Wheelbarrows, garden and utility carts, lawn mowers, tractors, hand trucks, trailers, dollies, trolleys, wagons, generators, snow blowers, pressure washers, air compressors, wood chippers, and other items are just a few of the items that they can be used in.

made from butyl rubber of the highest caliber. durable and strong.

producer with ISO 9001 certification. Indonesian made.#

I'm not sure what occurred, but I had to purchase 2 of them. I'm not sure if the first one already had a hole in it or if the Tire Discounters installers pierced it when installing it. On the second, so far, so nice. The second one is currently performing well.

These are for my (very) ancient 2-wheel dolly, which I ordered. They fit nicely and appeared to be well-made, however the angled valve stems weren't ideal for this use. I initially believed that they wouldn't fit into my hubs at all, but with some prodding, they finally slid back into position, allowing me to reattach the wheels. They appear to be in good hands, but there is still something to be aware of.

producer with ISO 9001 certification. Indonesian made.

A strict 100% quality control examination is completed on each tube.

Wheelbarrows, garden and utility carts, lawn mowers, tractors, hand trucks, trailers, dollies, trolleys, waggons, generators, snow blowers, pressure washers, air compressors, wood chippers, and other items are just a few of the items that they can be used in.

bent metal valve stem for TR87

made from butyl rubber of the highest calibre. durable and strong.#

I am really happy with how well-made this tube is. All tubes are NOT created equal. I really value well-made tunes because I find it difficult to place small tubes in tires with stiff walls. I want to do it as infrequently as possible.I vouch for this product as being well-made.

A tire with a maximum load capacity of 750 pounds is quite durable.

Little harm is done to your grass, turf, and equipment because to the wide shoulder design.

Pneumatic Air Filled Tire is the ideal option for your riding lawnmower because it can be filled to 10 psi and has a 2 ply construction.

tight-fitting tread blocks that offer excellent traction and balance.

20 x 10 8 in. in size.#

Although I didn't want to change the height, I needed to replace two worn-out 20x8-8 2-ply Carlisle Turf Saver tires and I also wanted more rubber on the ground. These 20x10-8 seemed like a fantastic fit and were reasonably priced at under $30 each. On another tractor, I had some Hi-Run Super Lug tires, and I was hoping for the same excellent caliber here. I am quite happy so far. For comparison, the image displays a brand-new Hi-Run 20x10-8 on the right and an older 20x8-8 turf saver on the left. Although the width increased, the height remained unchanged.

4.00-6 "tyre on a wheelbarrow. 13 "tyre circumference

3 "focused hub 5/8 "Bearings in balls.

300 lb maximum load. Not for use on highways.

pneumatic tyre, which is inflated. Grippy tread.

Ideal for household wheelbarrows.#

For this new wheel for my True Temper Wheel Barrow, quality product was available for 40% less than what Ace Hardware wanted. contrary to the original It has an axle shaft bearing surface with a zertz fitting for lubrication. Order fulfillment and shipment done instantly and quickly. Five days after my order, it was delivered (which included a 3-day holiday weekend).

Your text will be rewritten by QuillBot. Start by typing or pasting something into this box, then hit the enter

The old tires might easily have been replaced. Remove the locking snap, pop off the hub cap, remove the old wheels, clean the axle, and then reinstall the hub cap and new wheels. Oh, and grease the wheels, which is really simple to accomplish because a wise person placed the air and grease valves on the same side of the tire (unlike to original where the grease valve was on the inside of the tire). Compared to the original tires, my tractor spins much more easily. These tires appear to have been slightly thinner than the originals, despite the fact that their size is the same. The original might have dispersed over time. These tires are excellent replacements, however.