Best Automotive Performance Cat-Back Exhaust Systems in 2022


Are you looking for the best automotive performance cat-back exhaust system? If so, you’re in the right place. In this blog post, we’ll be discussing the factors you need to consider when searching for the best cat-back exhaust system for your ride.

The first factor you should consider is the type of exhaust system that best suits your vehicle. Cat-back exhaust systems come in different sizes, materials, and configurations. Depending on your vehicle’s engine size, power output, and intended use, you may find that one type of exhaust system works better than another.

Another important factor to consider is the sound you want from your exhaust system. Many people choose a cat-back exhaust system for its throaty, deep roar. However, some exhaust systems may be too loud for some drivers. Make sure you select an exhaust system that is within legal limits and won’t get you into trouble with the law.

In addition, you’ll want to look at the quality of the materials used in the construction of the exhaust system. Look for systems made from stainless steel or other high-grade materials that are designed to last. This will ensure that your exhaust system will stand up to years of use and will perform as expected.

Finally, consider the installation process of the exhaust system. Some systems may require more time and effort to install than others. If you’re not confident in your abilities, consider seeking help from a professional mechanic. This will ensure that the exhaust system is installed correctly and will perform as expected.

Finding the best automotive performance cat-back exhaust system for your vehicle can be a daunting task. But with the right research and guidance, you can find the system that best suits your needs. Make sure to consider the type, sound, quality of materials, and installation process when selecting your exhaust system for optimal performance.

1. MBRP S5200P 3" Aluminized Single Side Exit Cat Back Exhaust System

MBRP S5200P 3" Aluminized Single Side Exit Cat Back Exhaust System

Informations:

MBRPss

ssS5200Pss

ss

Review:

After ordering the exhaust, which was supposed to take three days to arrive, it was delivered after just two days. Installation was straightforward and rather simple. I removed the factory exhaust in 15 minutes and finished installing the MBRP system all by myself in about an hour. I didn't need to utilize or cut the tiny extension pipe used on Supercrew trucks because I have a 2005 FX4 Supercab. It is little louder than I anticipated, but I found that to be a positive. However, there is no chrome tip. I didn't intend to install it because I prefer the appearance of the original pipe. There is less chrome for me to clean and polish.

2. Borla 140067 Cat-Back "S-Type" System Exhaust

Borla 140067 Cat-Back

Informations:

Stainless steel of aircraft quality that has been precisely constructed with a one million mile guarantee to look brand new.

consists of a split rear exit and a single round, rolled, angle-cut tip.

To assist boost horsepower and torque, BORLA uses unique straight-through and multi-core technology.

High-quality components and craftsmanship ensure optimum performance.

Made from corrosion-resistant stainless steel of aircraft quality to reduce wear and tear on these parts during high-performance usage.#

Review:

My 2001 Mustang GT sounds fantastic with this exhaust system! I really wanted this system, but the prices on the other websites I visited made me decide to settle with a different brand. I bought this system right away when I saw it on Amazon for such a low price—almost $200 less than on the other Mustang website I was looking at. My fiancée and I finished bolting this exhaust up and removing the old exhaust in only 1.5 hours. Every time I start my automobile and every time I crank her, a great smile spreads across my face. The 4" polished tips also have a great appearance going out the back. It was a fantastic product at a fantastic price. Many thanks to Amazon!

3. Borla 140379 Stainless Steel Cat-Back Exhaust System

Borla 140379 Stainless Steel Cat-Back Exhaust System

Informations:

Patented straight-through and multi-core technology in the exhausts releases hidden horsepower.

2010 Toyota 4Runner 4.0 litre fits

Austenitic stainless steel is used to construct the best Borla Cat-Back exhaust systems.

Maximum flow and power are ensured by ultra-smooth mandrel bends.#

Review:

Great exhaust sounds ideal for a 4runner; at idle and revving it's a little bit louder but not by much; the exhaust sounds amazing when the vehicle is truly under load. Videos of this exhaust being run at idle are probably not going to persuade many people that it sounds amazing. You'll want it for yourself, so look for someone who has it on their 4Runner. Oh, I only gave this a 4-star rating since the dreadful exhaust clamp wasn't included in the box and the tip just barely touches the rear bumper. 4runner trail 2016

4. Flowmaster 17436 Cat-back System - Dual Rear/Side Exit - American Thunder - Moderate Sound

Flowmaster 17436 Cat-back System - Dual Rear/Side Exit - American Thunder - Moderate Sound

Informations:

Hardware and hangers are included for simple installation.

For Maximum Performance, Dyno Tuned

Exterior exhaust tone with moderate noise

Tube 16 gauge mandrel bent#

Review:

We were looking for something tasteful yet not garish. The tone of this is pleasant, and the noise from the highway isn't annoying. A fantastic middle-of-the-road product. Since the 2006 Silverado's existing plumbing had to be cut in order to be removed, we had to have it professionally installed.

5. MagnaFlow 16507 Large Stainless Steel Performance Exhaust System Kit

MagnaFlow 16507 Large Stainless Steel Performance Exhaust System Kit

Informations:

Direct through exhaust systems

Tubes with mandrel bends

Construction with stainless steel

Dynamic power#

Review:

Magnaflow 16507 was purchased for my 2015 GC Ultimate. Excellent fit and the 4" quad tips look fantastic! The internals of the muffler went bad around 8 months after I installed the exhaust, which made my car sputter and be extremely noisy. Amazon paid for the return of the old exhaust and replaced it without asking any questions. The new exhaust arrived and is currently working without any issues. I'll be replacing the secondary cats with test pipes to improve the sound. I gave it four stars for the quad tips, fit, and rumbling.

6. MagnaFlow 18982 Large Aluminized Performance Exhaust System Kit (Non-CARB Compliant)

MagnaFlow 18982 Large Aluminized Performance Exhaust System Kit (Non-CARB Compliant)

Informations:

Tubes with mandrel bends

simple installation

Dynamic power

Produced in the USA

aluminum-coated steel building#

Review:

With my 3inch down pipe, it sounds absolutely fantastic. On my 2006 LBZ crew cab short bed, it fit well. Could not be more pleased. brought out the turbo and deep tone really well.

7. MBRP S5230AL 3" Aluminized Steel Single Side Exit Cat-Back Exhaust System

MBRP S5230AL 3

Informations:

provides a deep, smooth exhaust tone.

increases horsepower and torque

installs using standard hand tools

increases fuel efficiency by one to two miles per gallon.#

Review:

I needed an exhaust exactly like this for my 2012 F150 FX4 Supercrew. Under acceleration, this is audibly stronger in the cab, but it is still very manageable and sounds great. According to other evaluations, this noise goes away between 500 and 1500 miles, and I'm cool with that. I've just had my system for one day, so I can't confirm. From the muffler back, my system didn't fit as well as I had hoped, but I discovered that if 1 "The front side of the over axle pipe (part #4) is cut off, and the installation is clean and the factory hangers precisely match up. These clamps appear to be top of the line, in contrast to other exhaust systems that have received terrible ratings for having subpar clamps. It was designed to fit three different F150 models from 2011 to 2014. If it weren't for that, I'd give it a five-star rating "My application needed a change to part #4. With that stated, if necessary in the future, I would buy the same exhaust again.

8. Flowmaster 17385 Cat-back System - Single Side Exit - Force II - Mild Sound

Flowmaster 17385 Cat-back System - Single Side Exit - Force II - Mild Sound

Informations:

Hardware and hangers are included for simple installation.

For Maximum Performance, Dyno Tuned

16-gauge aluminum tube that has been mandrel bent

Mild to Moderate Exhaust Tone Outside#

Review:

I chose the flowmaster kit after doing a lot of research because of the claimed low decibel ratings. Every kit had a greater decibel rating than I needed for my expedition. Because a factory replacement would cost too much and likely rust out in a year or two in Minnesota, we didn't want to replace our muffler with one from an auto parts store. This muffler system has excellent functionality, a perfect fit, and—most importantly—a quiet exhaust note that doesn't drone. With a huge SUV, I wasn't expecting to notice a noticeable improvement in gas mileage or power.

9. MBRP S5322AL Aluminized Turn Down Single Side Cat Back Exhaust System

MBRP S5322AL Aluminized Turn Down Single Side Cat Back Exhaust System

Informations:

increases fuel efficiency by 1-2 mpg

Tip made of T304 stainless steel, mirror-polished

increases horsepower and torque

provides a deep, smooth exhaust tone.

instals using standard hand tools#

Review:

Why some claim that this exhaust is loud is beyond me. It is not loud, and to be quite honest, I don't think it is significantly louder than the factory exhaust that came with the vehicle. I installed it on my 2009 Tacoma V6 Access Cab 6 speed manual. It is barely perceptible during takeoff. It goes on quite quickly. In most cases, you probably don't need to replace the gasket between the mid pipe and the y pipe, but in my case, the gasket was lost because the previous exhaust rotted there and the kit doesn't include one. The mid pipe must be reduced to 32 inches because this kit is designed for long beds. If I were to do it over, I would shorten it to 33 inches so that the back hanger would have a bit more area. At 32, it works perfectly and fits in the rear hanger, but it just feels a little too far forward in relation to the front of the vehicle.

10. MBRP S5206AL 4" Aluminized Single Side Exit Cat Back Exhaust System

MBRP S5206AL 4" Aluminized Single Side Exit Cat Back Exhaust System

Informations:

Tip made of T304 stainless steel, mirror-polished

provides a deep, smooth exhaust tone.

provides a deep, smooth exhaust tone.

increases horsepower and torque

Tip made of T304 stainless steel, mirror-polished

installs using standard hand tools

increases fuel efficiency by 1-2 mpg#

Review:

The best exhaust for a V10! Very good quality and simple installation.

About Author

Matt Grabowsky

My name is Matt Grabowsky and for over two decades I have been observing technological and social trends, talking about them and explaining them in an accessible way.