Best Jack Stands in 2022


Are you looking for the best jack stands to keep your vehicle safe while you work on it? Jack stands are an essential tool for any mechanic or DIY enthusiast. They provide a secure and stable base to hold your vehicle in place while you work on it. With so many different types and sizes of jack stands available, it can be overwhelming to figure out which ones are best for you.

The first thing to consider when looking for jack stands is the weight capacity. Different jack stands are designed to hold different weights, so make sure to find the ones that are rated for your vehicle’s weight. It’s also important to consider the height of the jack stands. Different heights can be more suitable for different vehicles, so make sure to get ones that will be the right height for your vehicle.

Another factor to consider when looking for jack stands is the construction. Look for ones that are made from sturdy materials, such as heavy-duty steel. This will ensure that your jack stands will last for years to come. Additionally, look for ones that have a wide base for extra stability.

Finally, make sure to check the reviews before making your purchase. This will help you get an idea of how well the jack stands hold up over time. Additionally, it’s a good idea to look for ones that have safety features, such as built-in locks or swivel feet.

Finding the best jack stands for your needs doesn’t have to be a difficult task. Just make sure to consider the weight capacity, height, construction, and reviews before making your purchase. This will ensure that you get the right jack stands for your vehicle.

1. Tesla Model 3 Lifting Jack pad - 4 Pack

Tesla Model 3 Lifting Jack pad - 4 Pack

Informations:

With mesh storage bag, four packs

Top shaft can be lifted at factory locations.

Use with a floor jack or a 2-post lift is possible.

Raising jack pads for the Tesla Model 3

Use properly to prevent harm to the battery and paint.#

Review:

I've already used them to rotate my Model 3's tires myself. The bag is lovely and makes a great container for it in the car. While I turned the jack up to meet the jack pad, the rubber ring allowed them to stay in the holes. These jack pads, which essentially look like hockey pucks, were the ideal size for my jack.I rotate my tires as follows: Lift by the back jack point and, just in case, place a block under the front (and lifting puck). From there, you can swap tires by removing both the front and rear tires. The lug nuts should have been loosened before you raised the car, if you were a smart person.

2. Pro-LifT T-6906D Double Pin Jack Stands - 6 Ton

Pro-LifT T-6906D Double Pin Jack Stands - 6 Ton

Informations:

6 tonne capacity and sturdy stamped steel construction

Handle locks and a mobility pin are both part of a double lock mechanism.

exceeds ANSI/PALD requirements or meets them. Ideal for usage at home, in automobiles, trucks, farms, and shops

Ratchet bar made of high-quality cast ductile iron

Smooth upward movement is made possible by the height adjustment mechanism, while the release handle locks and mobility pin#

Review:

I got this jack set to replace a set of 2 ton ones that would no longer be safe to use after I bought my new vehicle (a Ford Explorer).They came unharmed and in very good packaging. They were beautifully crafted and incredibly strong once unpacked. The double locking pin adds additional safety above the ratcheting release lever alone, and the welds looked to be above average. They weigh a total of 26.4 lbs, or about 13 lbs apiece, according to the shipping weight listing. Each jack seemed to weigh close to that much only by feel.The capacity of this pair of jacks appears to be in dispute. According to the tag on the jack, it can support 6 tons each pair, which should equate to 3 tons for each jack.I acknowledge that these jacks' product description on Amazon needs to be updated, but you cannot deduct stars from a review because of this. These products are deserving of a 5-star review if you base your evaluation solely on their specifications (construction, cost, features, etc.).

3. CURT 28575 Side Wind Drop Leg Direct-Weld Square Jack

CURT 28575 Side Wind Drop Leg Direct-Weld Square Jack

Informations:

supports a trailer tongue weight of up to 8,000 pounds.

Multiple ball heights are accommodated by the 15" of vertical travel.

The trailer coupler's side-wind handle is readily raised or lowered.

specifically made to be welded to the trailer frame

98% Of Orders Ship Within 2–3 Business Days.#

Review:

I used mine to install, remove, and store the storage kart for the outdrive on my yacht. Great results. Just grind off the painted area until it reaches the weld target. Steel is nearly 1/8 in "anywhere on the body, thick. I removed the foot piece and soldered the square tube to the frame of the kart. Then I pinned that piece by sliding the jack's upper portion over it. Folks, the foot piece may be pinned and extends up to 16 inches. Then there are another 15 "of a height for cranking. I've been asked to make one for my neighbor and a few of his pals. Without a doubt, I'll order this part again.

4. Torin Big Red Steel Jack Stands: 3 Ton Capacity, 1 Pair

Torin Big Red Steel Jack Stands: 3 Ton Capacity, 1 Pair

Informations:

Has an ASME safety certification and a limited one-year manufacturer guarantee.

more contact with the weight being supported thanks to the large saddle surface area; a large 7-5/8" by 6-7/8" foot base

sold and used in pairs; has a 3 Ton (6,000 lb) capacity and a height range of 11.22 to 16.7".

Built to last with a welded frame and high-grade forged steel; intended and committed to keeping you safe

Lightweight jack stands that are used to support your car after a jack lifts it; Able to handle a variety of vehicles, including light trucks and small cars.#

Review:

For Christmas, I received a 1965 Ford Mustang, and I required a set of jack stands to support it while I worked underneath. I needed something solid enough that I could be sure it wouldn't fall on me. I bought 4 of them, each weighing 2 tons. I elevated it with a hydraulic jack, put one of these under each wheel area, and then brought it back down. What a solid thing! Although the Mustang is nowhere near 8 tons in weight, these have a 2 ton capability each and can hold more than the entire vehicle.I move under it in my creeper without concern that it may fall on me. If a car wasn't supported by jack stands like these, I wouldn't work underneath it. And in my case, these go above and beyond what is necessary.Strong steel structure and incredibly simple operation.

5. Pro-LifT T-6903D Double Pin Jack Stands - 3 Ton

Pro-LifT T-6903D Double Pin Jack Stands - 3 Ton

Informations:

Ratchet bar made of high-quality cast ductile iron

exceeds ANSI/PALD requirements or meets them. Ideal for usage at home, in automobiles, trucks, farms, and shops

Handle locks and a mobility pin are both part of a double lock mechanism.

Smooth upward movement is made possible by the height adjustment mechanism, while the release handle locks and mobility pin

3 ton capacity and sturdy stamped steel construction#

Review:

These are outstanding. Although I've never actually required a pair, I borrowed a neighbor's when the situation arose. I had to struggle for hours to lift the frame high enough to brace it until these arrived since they broke. Amazingly, the double lock feature. Trust is a key component when you are working UNDER something that has thousands of pounds of steel sitting on it. These will give you all the confidence in the world if you understand how to use them, which means that you shouldn't use them on hills or soft terrain (duh).

6. Torin Big Red Steel Jack Stands: Double Locking, 6 Ton Capacity, 1 Pair

Torin Big Red Steel Jack Stands: Double Locking, 6 Ton Capacity, 1 Pair

Informations:

Having a double-lock protection mechanism installed, double safety

Has an ASME safety certification and a limited one-year manufacturer guarantee.

Precise adjustments are made via a single-piece, self-locking, multi-position, forged iron ratchet bar.

Large foot base dimension of 10-13/16" by 9-7/16" on saddle allows for better contact with the load being supported.

Double locking jack stands with a 6 Ton (12,000 lb) capacity each are available as a pair. Their heights range from 15-3/8" to 23-13/16".#

Review:

These jack stands perform admirably. I've never used a set with a double locking pin, and I find that to be incredibly useful.Simply slip the black component into the red piece and bend the tab over to assemble them. If you've ever used a jack stand, this should be obvious.Oh, and another reviewer argued that putting together a piece of safety equipment on your own seemed risky—something about bending the tab over. If you were to pick the jack stand up from the top, the tab would just prevent the top from rising back up out of the bottom. The tab has no significance. Just an FYI for anyone who is unsure of the tab's intended use.However, I would query the quality control. I examined my welds right away when I got there after seeing all the pictures of the terrible ones. Although I don't work as a welder, I have done a little bit of welding here and there. The set I received doesn't seem all that horrible to me. There are a few places here and there where the welds aren't flawless, but overall I believe they are good enough. I might have just been lucky, or maybe the corporation saw these evaluations and changed their QC department. However, I do wonder why they decided to weld only inside and not outside.

7. Torin Big Red Steel Jack Stands: Double Locking, 3 Ton Capacity, 1 Pair

Torin Big Red Steel Jack Stands: Double Locking, 3 Ton Capacity, 1 Pair

Informations:

Precise adjustments are made via a single-piece, self-locking, multi-position, forged iron ratchet bar.

Having a double-lock protection mechanism installed, double safety

Has an ASME safety certification and a limited one-year manufacturer guarantee.

Big surface area of the saddle improves contact with the load it is supporting; large foot base measuring 7-11/16" by 6-7/8"

Double locking jack stands with a 3 Ton (6,000 lb) capacity each are sold as a pair and range in height from 11-1/4" to 16-3/4".#

Review:


8. Valterra A10-0900 Trailer Tongue Jack Stand-Red

Valterra A10-0900 Trailer Tongue Jack Stand-Red

Informations:

prevents the trailer tongue from sinking into the pavement on hot days by supporting it.

holds ten thousand pounds.

weighs only 2 lbs. and eliminates the need to carry and store large wood blocks.

Measures 8-3/8" high x 8-5/8" wide

Not intended for use with wheeled or castered trailer jacks#

Review:

After 30 years of relying on little bits of wood or rocks, this luxury item is useful and reasonably priced. The only issue arises if your hitch won't crank up high enough for you to slip it from from under the tongue. It's just simpler and much more practical. Small wood blocks might be preferable in that situation. However, I haven't run into any issues with it, and thanks to the wide base, it's more stable than a little stack of blocks. Although it is more expensive than wood blocks, it is also simpler and cleaner.

9. Hi-Lift Jack HK-B Black Handle-Keeper

Hi-Lift Jack HK-B Black Handle-Keeper

Informations:

constructed from durable polyurethane

Handle-Keeper can be removed thanks to a unique design without removing the top clamp-clevis.

When you need to utilise your jack, it is simple to remove with little hassle.

black plastic mould

When not in use, the Hi-Lift jack handle is secured to the upright steel bar by the Hi-Lift Handle-Keeper, which also stops it from rattling while being transported and stored.#

Review:

After 30 years of relying on little bits of wood or rocks, this luxury item is useful and reasonably priced. The only issue arises if your hitch won't crank up high enough for you to slip it from from under the tongue. It's just simpler and much more practical. Small wood blocks might be preferable in that situation. However, I haven't run into any issues with it, and thanks to the wide base, it's more stable than a little stack of blocks. Although it is more expensive than wood blocks, it is also simpler and cleaner.

10. Performance Tool Yellow Steel Frame-TROLLEY JACKS (5,000 lbs) W1640 2-1/2 Ton (5,000lbs.) Capacity Floor

Performance Tool Yellow Steel Frame-TROLLEY JACKS (5,000 lbs) W1640 2-1/2 Ton (5,000lbs.) Capacity Floor

Informations:

sturdy steel frame with flanges.

safety overload protection bypass valve

With a raise range of 5" to 15 1/2", it has a 5, 000 lb capacity.

fantastic for light-duty trucks and vehicles.

Casters that swivel for simple positioning.#

Review:

For the price, this jack is a fantastic purchase. It will only be used by me for dining a dozen times a year.Plus: Reliable, sturdy designalloy wheelsThere is already fluid in place.transport handle.Negative: I'm used to longer pump handles.Release valves initially feel abrupt, but they grow on you. A really slow turn is required.Since the wheelbase is short, you must park the car on a stable surface and block it off completely to prevent it from toppling. However, you would do that with any jack.According to Rob, the short handle and thin wheelbase were chosen to reduce transportation expenses and, consequently, pricing. I'm okay with that. With a little tubing, I can make the handle longer. If you're not a practicing mechanic who needs to use the jack frequently, I'd say this one will function just fine, and the price is amazing!

About Author

Matt Grabowsky

My name is Matt Grabowsky and for over two decades I have been observing technological and social trends, talking about them and explaining them in an accessible way.