[Q

My original controller charger broke after only a year, so I was in the market for a new one. I choose to try this one because it looked fantastic.It's little, which is actually not a terrible thing. Actually, my TV stand can accommodate it better. Its LED lights are simple to comprehend. Green indicates a full charge while red indicates charging.I particularly enjoy how the controllers' charging port is located underneath them. They are simple to install on the charging station and simple to take off. One of my controllers has a skin on it, another important detail. The charger functions flawlessly and presents no skin-related problems.I love this charging station because it gives my controllers a speedy charge. Additionally, the green LED surrounding the base makes it seem amazing!

I purchased this for my Steam PC setup's Bluetooth-enabled DualShock 4 controllers. I discovered I had to keep them connected to a cable in order to use them because, for some reason, I had inconsistent results while attempting to charge them via microUSB cable. Until I discovered this convenient charging station, that is! Now that controllers can charge in a fair length of time (I normally don't rush and switch controllers), this is a big improvement. Finished with dead batteries!

Support— If you experience any issues with a Y Team product. Contact us at any time, and we'll deliver a satisfactory response.

Fast Charging: The PS4 controller charger was capable of simultaneously fast charging two controllers.Two full charges will help you save time.

Led Indicator - A fashionable led indicator would clearly show the charging status, with Red denoting charging and Green denoting a full charge or standby.

Chip Defense—Charge your PS4 controller, PS4 Pro, or PS4 Slim in a secure manner.features short-circuit, over-voltage, and over-charging protec

Great results! It is set up with external power (had one laying around). good fits both controllers. Although it's not a "drop" and go connection, I enjoy that when I turn it on (which isn't hard at all!! ), I KNOW it's connected in. similar to the charger I've been using for my PS3 controller for years! The front has low light, which is fantastic. Had it for a short while, but it looks to have the same battery life as my PS3 charger, which I am still using.

Dual shock PlayStation 4 controller charging station, or PS4 charger. Enjoy hours of non-stop gaming with two PS4 controllers powered up at once (PS4, PS4 Pro, and PS4 Slim controller).

When the controllers are fully charged, the red LED charge indications on the indicator light become green. Lift your controller from the LED indicator light, which will glow red when it is charging and green when it is fully charged, and you are ready to go.

Short-circuit protection, over-temperature protection, and over-voltage protection are all included in the lifetime guarantee, which is supported by YCCSKY.

Keep your PS4 controllers fully charged and ready to use with this quick and efficient charging station.(Controllers not included.) Two controllers charged simultaneously. Fast wireless PS4 charging for 2.5 hours

Easy to assemble; space-saving dock, storage, and charging design Grab a charged PS4 controller and get in on the action with two dualshock4 wireless controllers that have a low profile design to match your PS4 system.#

This charger is ideal for doing away with wires, it is compact, simple to set up, and it looks beautiful next to the PS4. The setup is the finest part. The station holds the controllers snugly while charging and while not in use, making it almost "plug and play." You can see when charging is taking place and when the controller is prepared thanks to the station's controller charging LEDs. It fits perfectly in a corner next to the PS4 and has a really "tekky" appearance, which I enjoy. I adore it and it looks wonderful and performs perfectly.

Warranty of one year. Initial 30-day "money-back" guarantee. 11-month "replacement" warranty after the first 30 days. Purchase with assurance. Concerns or inquiries regarding this PS4 controller charger are welcome. Do not hesitate to contact us.

Outstanding chip design. Protection from overcharging, overheating, excessive current, excessive voltage, short circuits, and excessive discharging. Our never-ending goal is to figure out how to give you a reliable PS4 charger.

Charger for PS4 Controller for Playstation 4, PS4 Slim, and PS4 PRO (Charge cable is included)

You can securely store and charge up two PS4 controllers at once thanks to the fast charging feature and the two built-in micro USB adaptor connectors.It only takes one controller 1.5 hours. 2.5 hours for a pair

Charge two wireless PS4 controllers at once using the USB port on your PC, PS4 console, or wall outlet (Controllers and Wall Adapter are not included)#

The charger stand was delivered on schedule and was small enough to fit in my mailbox. It took less than 20 seconds to put everything together and start functioning. I used a charger for each box and connected my PS4 to an outlet instead. The only issue is that when you plug in the controllers, you must connect the face side of the controller before attempting to connect the charging port side. It becomes difficult, but the output is still good.

Although it functions effectively, this device has considerable potential. You can't help but touch buttons when I try to put the controller on the charger, and the system frequently turns back on. Additionally, the green LED that shows the charge level is always on. When there is no controller in the charger, the green light is on, yet it turns red during charging. My XBox One controllers can be charged using a charger that lets you place the controller in a "cradle" and then push down on the cradle to start charging it. A red LED signals charging while it is taking place. You never unintentionally press any buttons on the controller during this procedure; instead, when it goes green, you push the cradle down and it removes the controller from the charger with a full charge capacity.

I have three different types of the same charger, but each one docks the wireless controller in a different way. The charging snap-ons were simple to attach to the controller, and this charger, in comparison to the other ones I own, is the best by far. The controller is also very simple to seat and charge. This model requires less effort to seat and snap in than the other ones I previously owned, and it works perfectly with my PS4 controllers.

Review of X22 outstanding charging station The inconspicuous little dongles allow the controller to be simply dropped into the cradle. It makes charging so much simpler and prevents damage to the connector. When completely charged, the LED transitions from red to green.The absence of a power brick is another pleasant aspect. It connects to any USB wall charger using a USB cable.

Up to two DualShock 4 controllers can be charged at once.

matches your DualShock 4 controllers and PlayStation 4 system.

Never be concerned about battery life.

officially authorised item

utilise an AC adaptor to charge your controllers.#

It has been revolutionary to switch from a charging cord to this charging station!Because you can't use the controller and charge it at the same time like you can with a charging cord, it's not as convenient as it could be. However, if you have two controllers, this shouldn't be a problem at all! While I use the other controller, I always leave one controller on the charging station (there is an intermediate'setting' on the dock that allows you to position the controller within the docking cradle, but not set it far enough down to commence charging). I can fully recharge the second controller a number of times with the life that one controller provides, and I can simply switch them out when the one I'm using runs out.Although the base is a simple, thin piece of plastic that feels somewhat cheap, it is nevertheless very useful. You won't need to connect your wireless controller in to charge thanks to it. It eliminates the ugly and bothersome cord that was resting on your lap. It's stylish and functional at the same time!How-to: Set one of the cradles for your PS4 controller. When you hear or feel a firm "click," push the controller all the way down into the cradle. If you do it correctly, the light bar on the controller will begin to pulse a faint yellow/orange to indicate that it is charging. The light bar won't pulse when charging is finished.To publish: You can lift the controller out of the station after pressing down on it once again, hearing or feeling another click.Advantages: The controller light bar will gently pulse yellow or orange while charging to indicate that it is functioning.can support a controller without requiring charging (see above notes)The PS4 looks fantastic next to it.allows you to quickly return to play after an hour or two of charging your controller.To make lining up simple, each cradle has a little divot with an indication of where the "PS" button will be.has a notch for the cord so it may rest evenly on the table on the bottom.Cons: Materials are rather inexpensive; there isn't an additional "hook" for storing headphones.