Best RC Radio Transmitters in 2022

If you are an RC enthusiast, you know that nothing beats the thrill of flying a remote-controlled (RC) aircraft, car, or boat. But to make the most of your RC experience, you need to find the best RC radio transmitters. These devices are the key to controlling your RC model and ensuring that you have a smooth and safe flight.

When it comes to choosing the best RC radio transmitters, there are several factors to consider. First, you need to decide what type of RC model you will be flying. Different types of RC models require different types of radio transmitters. For example, some transmitters are designed specifically for RC airplanes, while others are designed for RC helicopters.

Second, you need to decide what type of frequency you will be using. Different frequencies can be used to control different types of RC models. The most popular frequencies are 2.4GHz and 5.8GHz. It is important to choose the right frequency for your model, as this will ensure that the transmitter and receiver are compatible.

Third, you need to consider the range of the transmitter. Different transmitters offer different ranges, and this can be important if you are flying your RC model in an area with a lot of obstacles. Make sure to choose a transmitter that offers the range you need.

Finally, you need to consider the features of the transmitter. Some transmitters offer features such as a built-in telemetry system, which allows you to monitor the performance of your RC model. Other features such as an LCD display, joystick, and user-friendly programming can also be beneficial.

When it comes to finding the best RC radio transmitters, it is important to do your research. Look for reviews online and talk to experienced RC enthusiasts to get their opinions. This will help you find the best transmitter for your needs. Once you have the right transmitter, you can enjoy the full RC experience.

1. Radiolink RC4GS 2.4G 4CH RC Transmitter and Receiver R6FG Gyro Radio Remote Controller for Car Boat Crawler

Radiolink RC4GS 2.4G 4CH RC Transmitter and Receiver R6FG Gyro Radio Remote Controller for Car Boat Crawler

Informations:

Dual Programmable Mix Control: Simple to use and set up, it allows you to preset mix control for every two channels. All sorts of rc boats and cars, including crawler and tank, can be converted to twin-engine designs.

Built-in gyro: The R6FG, when operating in gyro working mode, can maintain the vehicle's straight path during rapid acceleration and braking. Gyro sensitivity is modifiable.

"ABS and Fail-Safe Protection": When vehicles brake at corners, anti-lock brake support vehicles do not squeal. To ensure the model's security, CH1–CH4 can be put to fail-safe mode.

Excellent Anti-interference: FHSS reduces overall signal interference, enabling the RC4GS to provide a very steady and stable transmission signal present on all four channels, with a control distance of over 1300 feet (400 m) and a reaction time of only 12 ms for all four channels.

When used with a Radiolink R7FG receiver, the screen can display "Real-time Information" such as battery voltage, RSSI, and receiver signal.#

Review:

It's insanely great, this thing. There are all the adjustments you could possibly need or imagine. The layout and readability of the screen are excellent. The steering wheel knob feels excellent in the hand and has a lovely layer of foam on it. The knob also features a strong spring that is slop-free. The throttle trigger works well and is quick. When it comes to pairing with the receiver, both the radio and the gyro are lovely and simple to engage. On the side is a nice gyro sensitivity knob. Although 4 channels are wonderful, 6 channel radios are certainly needed by crawler guys. The instructions were rather vague when it came to describing the various options in the menu, but there are plenty of videos on YouTube for that. That was the one thing I didn't enjoy about it. Overall, a great purchase for the technology and a significant improvement over an RTR radio.

2. Flysky FS-i6 6CH 2.4GHz AFHDS RC Transmitter w/FS-iA6B Receiver for RC Multirotor Helicopter Airplane Glider Quadcopter (Model_2)

Flysky FS-i6 6CH 2.4GHz AFHDS RC Transmitter w/FS-iA6B Receiver for RC Multirotor Helicopter Airplane Glider Quadcopter (Model_2)

Informations:

operation of 3/6. For the transmitter, just need 4 * AA batteries (Not included)

1) Attention: Throttle stick on the right in Mode 1. Mode 2: Left throttle stick

5) Attention: DHL offers express delivery within 3-5 working days.

2) Reliable, interference-free operation of the 2.4GHz AFHDS 2A signal.

4. When used in conjunction with a high sensitivity receiver, this radio system ensures jam-free long-range radio transmission. Each transmitter has a unique ID, and when a receiver and transmitter are connected, the receiver saves that ID and can only accept data from the unique transmitter.#

Review:

Arrived early but had trouble getting the computer's software to operate; nevertheless, after fixing the bug, it worked perfectly. Contacted the vendor, who was quite accommodating.

3. FlySky FS-GT2 2.4GHz 2 Channel Digital Transmitter and Receiver Radio System

FlySky FS-GT2 2.4GHz 2 Channel Digital Transmitter and Receiver Radio System

Informations:

Integrated Fail Safe

Adaptive Design

Transmitter and Receiver Are Included in the Full System

Low Voltage Alert

Technology 2.4Ghz#

Review:

Works well. Haven't checked the entire range, but it appears quite far. Receiver is incredibly small. Although the controller is simple to operate, 8 AA batteries are needed. Despite being a little difficult to grasp, the instructions explain what each adjustment on the flap does.

4. Flysky FS-i6X 10CH 2.4GHz AFHDS RC Transmitter w/ FS-iA6B Receiver

Flysky FS-i6X 10CH 2.4GHz AFHDS RC Transmitter w/ FS-iA6B Receiver

Informations:

Review:

Wow, this really impresses me. It works great with the basic cable I made to connect it to my PC and use as a simulator. Although I'm using rechargeable batteries, it doesn't seem to be that awful.I honestly have nothing negative to say about it. There are several aspects in it. I found just what I needed.It really is annoying that the PDF manual you may download from their website is not searchable, as another reviewer pointed out. Since I have the full version of Acrobat, I converted it, however their manuals should actually be searchable. If you can locate what you need in the handbook, it's extremely fantastic.

5. 2pcs 2.4G 5.8G FPV TX Antenna RPSMA Male Dipole Whip FPV Antenna for FPV Multicopter Racing Drone Quadcopter

2pcs 2.4G 5.8G FPV TX Antenna RPSMA Male Dipole Whip FPV Antenna for FPV Multicopter Racing Drone Quadcopter

Informations:

Dipole Whip, an omnidirectional antenna 2.4GHz and 5.8GHz transmitter and receiver-compatible antenna

The drone antenna has a frequency range of 2400–2500 MHz and 4900–5 900 MHz.

Connector type is RP-SMA male; length is 4 cm; antenna gain is 2 dBi; impedance is 50 ohm; and the SWR value is 1.5.

An antenna with good performance has a low feeder loss, more consistent gain, and a stronger signal.

Compatible: The FPV quadcopter and wifi antenna on the PC motherboard function well.#

Review:

On the advice of a random Reddit user, I purchased these to replace the cable antenna attached to my PC that I unintentionally tore out. Not only is my reception greater than it was with the default antenna, but there is also no cable to mess with, and because they are so little, it is extremely unlikely that I will tear them off (as usually happens to me with longer antennas.) These should fit the majority of Wi-Fi adapters and use standard SMA connections.

6. Flysky FS-GR3F FS GR3F 2.4G 3CH Receiver - Compatible with FS-GT2 / FS-GT2B / FS-GT3 / FS-GT3B / FS-GT3C / TH9X RC Car Boat Truck Transmitter

Flysky FS-GR3F FS GR3F 2.4G 3CH Receiver - Compatible with FS-GT2 / FS-GT2B / FS-GT3 / FS-GT3B / FS-GT3C / TH9X RC Car Boat Truck Transmitter

Informations:

Receiver for RC boats and cars that is 2.4 GHz standard.

1 FS-GR3F Receiver, 1 Bind Plug, 1 Antenna Tube are included in the packaging. 3 Years of Friendly Customer Service with Time and Life Limited Warranty. To contact us with any questions, please click "Miuezuth." I'm grateful.

CE, FCC, and RoHS certifications.

The FS-GR3F receiver is compatible with the following models: GT2, GT3B, GT3C, CT6B, T4B, T6, TH9X, iT4S, i4, i6, GT2E, GT2G, and i10.

Strong signal distance, very quick link-up, and ease of binding.#

Review:

On the advice of a random Reddit user, I purchased these to replace the cable antenna attached to my PC that I unintentionally tore out. Not only is my reception greater than it was with the default antenna, but there is also no cable to mess with, and because they are so little, it is extremely unlikely that I will tear them off (as usually happens to me with longer antennas.) These should fit the majority of Wi-Fi adapters and use standard SMA connections.

7. FrSky Transmitter Q X7 FCX07 Li/NiMH Dual Mode Battery Charger

FrSky Transmitter Q X7 FCX07 Li/NiMH Dual Mode Battery Charger

Informations:

12–18 V/1 A DC input 800 mA Charge Current Battery Type: 2S Li-Po 7.4V and 6S Ni-MH 7.2V

Ensure that the supported battery type is connected to the appropriate switch position. Original FrSky battery is advised.

Supported Battery Charging Position for 6S Ni-MH

One Frsky Taranis Q X7 Transmitter

Review:

Five stars because you require it. They are rude, thus they are sold individually. Who offers a radio without a battery or a means of charging one after purchasing one? Not a smart sales strategy. The $20 price tag for this 1-inch plastic rectangle has left a terrible taste in my mouth, and I know I'm not the only one.

8. FrSky 2.4G Accst Taranis Q X7 16 Channels Transmitter Remote Controller White Battery and Battery Trays Not Include

FrSky 2.4G Accst Taranis Q X7 16 Channels Transmitter Remote Controller White Battery and Battery Trays Not Include

Informations:

Numerous battery options are available: battery: FCX07 Li/NiMH Dual Mode Charger, 800mAh NiMH, 1800mAh LSD NiMH, and 2S LiPO Battery (optional accessories) (Optional Accessories)

Real-time Receiver Signal Strength Indicator (RSSI) Alerts for Flight Data Logging

Note: The battery and battery trays are not included in the default FrSky Taranis Q x7 kit. The new version has a charging connector on the side and does not contain a battery tray.

TARANIS X9D Plus compatible model configuration files for super-low latency vibration alerts

Receivers from the FrSky X, D, and V8-II series are compatible, as are additional receivers if an external module is used.#

Review:

It works fantastically, and with some online modifications, you can make it do practically anything (if you can code or understand it). So far, I've been able to use YouTube to make several switches play and make each switch functional (left for arm, right for buzzer, etc.). While flying, I listen to mp3 files, adjust volume with the knobs, create my own splash screens, and use Portal noises for the various instructions! great for practice using openTX and Liftoff (FPV Drone game on Steam I highly recommend).One problem I had was that the module didn't include the proper microSD. I tried to reformat/try a 64gb, but it wouldn't read (yeah, I realize it's overkill, but that's all I had at the time). I then bought an 8gb, the smallest size my shop sold, and THEN it was operating properly. To save some money, use a 2S battery instead of the 6-tray AA container they have.

9. AKK FX2-ultimate 5.8GHz VTX with MMCX Support OSD Configuring via Betaflight Flight Control Board Long Range FPV Transmitter

AKK FX2-ultimate 5.8GHz VTX with MMCX Support OSD Configuring via Betaflight Flight Control Board Long Range FPV Transmitter

Informations:

7-26V input and 5V output are both available for your camera.

Filtered power guarantees pristine video that was created for racing. frequency and power configuration with one button.

OSD Configuration via Betaflight Flight Control Board is supported with MIC.

Power switchable at 0.01mW, 25mW, 200mW, 600mW, and 1000mW

Compatible with Betaflight 3.2 and 3.3, uses 0.01mW of power with no interference, and is OSD FC compatible.#

Review:

I have tested every VTX brand, but I only use AKK. In my opinion, AKK is the best. Continue the excellent work! You may watch a video of the range on my youtube channel. airpollutionFPV

10. AKK TS832+RC832 5.8G 2000M Range FPV Audio Video Transmitter and Receiver for FPV Drone

AKK TS832+RC832 5.8G 2000M Range FPV Audio Video Transmitter and Receiver for FPV Drone

Informations:

FPV transmitter and receiver set for aerial filming, plug and play

It is designed for places where there are too many frequencies in the air and supports the complete spectrum of 37 channels, including raceband.

Easily Pressing the button will change the frequency channels and bands.

Antenna RP-SMA plug, VTX and receiver side RP-SMA jack

It supports 5 bands and is compatible with all frequencies. Channels and bands are displayed on a double-screen.#

Review:

Excellent system; I also purchased the cloverleaf antennas that were suggested. You can see in my attached photos that the RX and TX jacks are RP-SMA. Although I haven't reached the maximum distance yet, I've already gone around 1 1/2 miles without seeing any static or "snow" in my goggles' display. I've had far more expensive setups that couldn't do that, so this is quite remarkable!
About Author

Matt Grabowsky

My name is Matt Grabowsky and for over two decades I have been observing technological and social trends, talking about them and explaining them in an accessible way.