The highest standards are upheld for all of our goods by being tested for performance and safety

At $10 each, these fixtures are amazing. The two parts connect together, and we utilized them under our waterproof deck with Sunco's LED inserts (2700K, also sold in a set of ten on Amazon for $75). They are simple to install and have tiny nails in each leg that function well even with I-joists. The metal, movable mounting slides can be mounted on any of the fixture's four sides and are simply compressed to a shorter length for mounting between joists spaced on 12 inch centers. They come with press-in electrical connectors that can accommodate different wire gauges and, providing you like the connectors, make wiring extremely quick, as with most new fixtures. Personally, I'm still unsure of their long-term sustainability, so I opted to cut them off and use tried-and-true wire nuts, covered in electrical tape, as I have done for many years without ever experiencing a single problem. But if you like them, you can simply mount and connect up all ten fixtures. These fittings will surely be used by me in the future!

This lighting is exactly what I needed. Based on the number of lights I needed and the size of my kitchen, I chose to use lower lumen lights after conducting extensive research and luminosity calculations. The lower brightness lights, according to the article, produce 940 lumens. That is untrue. The output of 850 lumens was plainly mentioned on the box of each one I received. But I increased my estimate because I reasoned that if it were a little too bright, a digital LED dimmer may help me tone it down. My kitchen is sufficiently bright even with 850 lumens per light. The accuracy of the information advertised must be guaranteed by Amazon and Lithonia. The circle template that is included with each light will also function properly. The fit is a little too shoddy for my taste, though. To achieve a tighter fit, I made the holes somewhat narrower. By no means a show-stopper. I daisy-chained six of these lights and used a Lutron Maestro CL dimmer and companion switch to dim them in three different ways. There is absolutely no buzzing with this setup. Last but not least, the knockout holes are slightly larger than average. I put some regular romex strain relief clamps, however they fit a little shoddily.

SIMPLE INSTALL - Use our step-by-step instructions for a quick and safe setup! The bar hangers are used to install Sunco's direct wire renovation cans with junction boxes to the framing (prior to drywall). Included is a TP24 connector.

10 Years of Sunco Benefits Warranty! With a proudly American background, Sunco provides high-quality goods at competitive costs, all supported by educated support staff and the best warranties in the business.

Most Recommended 6 Inch Remodel Can

The highest standards are upheld for all of our goods by being tested for performance and safety

For a retrofit upgrade of the entire house, I bought 24 of these units. They arrived in a lovely packaging and were in good condition inside. The enclosure itself is glossy white, and the electrical box contains standard wiring (for LED pins). They are less hefty than Halo fixtures, but they cost a lot less and are IC certified and sealed. Additionally, the electrician fitted these housings to the ceiling with ease using a regular round saw attachment for his drill. Photos show finished dwelling without trim and finished plaster ceiling with trim. Most importantly, they are compatible with Costco's FEIT 4" retrofit LED trims. There were no connections problems because the pins were compatible. The final product is sleek and amazing since the trims fit the housings so tightly. not a chance.

Wide Range of Applications: This powerful light can illuminate a variety of applications, including closets, kitchens, hallways, doors, basements, and more. It can be dimmed smoothly from 5% to 100% and is compatible with most dimmers.

Reliable Safety: Aluminum light that offers corrosion protection and rust avoidance, ETL-listed safety requirements, and sponge gasket that significantly enhances the sealing performance make this the ideal light for your roof and ceiling.

Space-saving Fixture: This slim, bright LED recessed ceiling light in silver. Only only 2 inches of ceiling clearance, making it the ideal alternative for tight ceilings that won't accommodate a can.

High-efficiency Lightness: Energy Star-certified slim lights only use 12 watts of power and produce 850 lumens of brightness, which is equivalent to a 100-watt halogen lamp. This reduces lighting costs by $2091 per set over the course of a set's 36,000-hour lifespan.

Simple Installation: Connect the male/female connection from the accompanying J-box to the lamp, then use a spring clip to secure it to the ceiling. Installation takes just a few seconds. Your options are no longer limited by a recessed can. This IC-rated lamp may come into touch with ceiling insulation.#

We opted not to use conventional "can" lighting when constructing our basement. We decided on these 6" thin, 3,000k warm light emitting, dimmable dics. They produce a warm, pleasant light that is 100 Watt equivalent before being dimmed, and they look great when placed.Here are some lessons we discovered:1. Make sure the light location is clearly identified when your electrician runs the cable that will be hidden by drywall (or other ceiling material)! Installers of dry wall must maintain the placements of the lights with a visible nail or something similar. Additionally, make a note of the placements of the lights on a map of the ceiling. Measure the distance in inches between the two objects.If you didn't take adequate note of the 110 wire and light positions, you'll regret it. To find the 110 wire for two of our lights, we had to dig around. That was tedious and unpleasant.2. It is quite easy to use a 6" hole saw to create a flawless cut in the ceiling once the light locations have been accurately noted or located. Reach inside for the wire, connect it inside the junction box provided, attach the output wire to the light disc, and then place the disc into the 6" hole to complete the installation.3. Select a dimmer switch that is compatible with Lutron LEDs if you want to utilize one. That switch will function normally as it decreases from 100% to roughly 5%.4. TORCHSTAR offers both direct sales on Amazon and "other buying alternatives" on the site. Although there may be a small price difference, the lights are the same. I was able to get all the lights we required by shopping at both stores.5. My electrician who installed the lights was so pleased that he is now purchasing similar lights for some of his other clients. He enjoyed the appearance, ease of installation, and quality.

The highest standards are upheld for all of our goods by being tested for performance and safety

These fixtures are sturdy and nicely made compared to others I have placed. Because an inspector missed the thermal cutout that is usually included for Type IC luminaire installations, I have had installations fail. Regarding [Luminaires and Fittings] Light-emitting-diode Recessed Luminaires, the UL PRODUCT CATEGORY is reviewed. This category includes luminaires that must be installed in compliance with Article 410, NFPA 70, and the "National Electrical Code" in recessed cavities in walls, ceilings, and other locations. These fixtures meet the requirements to be classified as "Inherently-protected Luminaires" by UL, which states that "A recessed luminaire that does not exceed temperatures greater than 90°C on outside surfaces even when covered with insulation and mis-lamped or overlapped is identified by the marking "INHERENTLY PROTECTED." I would repurchase these.

High-efficiency Lightness: Energy Star-certified slim lights only use 12 watts of power and produce 850 lumens of brightness, which is equivalent to a 100-watt halogen lamp. This reduces lighting costs by $4182 per set over the course of a set's 36,000-hour lifespan.

Space-saving Fixture: This slim, bright LED recessed ceiling light in silver. Only only 2 inches of ceiling clearance, making it the ideal alternative for tight ceilings that won't accommodate a can.

Wide Range of Applications: This powerful light can illuminate a variety of applications, including closets, kitchens, hallways, doors, basements, and more. It can be dimmed smoothly from 5% to 100% and is compatible with most dimmers.

Reliable Safety: Aluminum light that offers corrosion protection and rust avoidance, ETL-listed safety requirements, and sponge gasket that significantly enhances the sealing performance make this the ideal light for your roof and ceiling.

Simple Installation: Connect the male/female connection from the accompanying J-box to the lamp, then use a spring clip to secure it to the ceiling. Installation takes just a few seconds. Your options are no longer limited by a recessed can. This IC-rated lamp may come into touch with ceiling insulation.#

We opted not to use conventional "can" lighting when constructing our basement. We decided on these 6" thin, 3,000k warm light emitting, dimmable dics. They produce a warm, pleasant light that is 100 Watt equivalent before being dimmed, and they look great when placed.Here are some lessons we discovered:1. Make sure the light location is clearly identified when your electrician runs the cable that will be hidden by drywall (or other ceiling material)! Installers of dry wall must maintain the placements of the lights with a visible nail or something similar. Additionally, make a note of the placements of the lights on a map of the ceiling. Measure the distance in inches between the two objects.If you didn't take adequate note of the 110 wire and light positions, you'll regret it. To find the 110 wire for two of our lights, we had to dig around. That was tedious and unpleasant.2. It is quite easy to use a 6" hole saw to create a flawless cut in the ceiling once the light locations have been accurately noted or located. Reach inside for the wire, connect it inside the junction box provided, attach the output wire to the light disc, and then place the disc into the 6" hole to complete the installation.3. Select a dimmer switch that is compatible with Lutron LEDs if you want to utilize one. That switch will function normally as it decreases from 100% to roughly 5%.4. TORCHSTAR offers both direct sales on Amazon and "other buying alternatives" on the site. Although there may be a small price difference, the lights are the same. I was able to get all the lights we required by shopping at both stores.5. My electrician who installed the lights was so pleased that he is now purchasing similar lights for some of his other clients. He enjoyed the appearance, ease of installation, and quality.

Simple Installation: Connect the male/female connection from the accompanying J-box to the lamp, then use a spring clip to secure it to the ceiling. Installation takes just a few seconds. Your options are no longer limited by a recessed can. This IC-rated lamp may come into touch with ceiling insulation.

Space-saving Fixture: This slim, bright LED recessed ceiling light in silver. Only only 2 inches of ceiling clearance, making it the ideal alternative for tight ceilings that won't accommodate a can.

High-efficiency Lightness: Energy Star-certified slim lights only use 12 watts of power and produce 850 lumens of brightness, which is equivalent to a 100-watt halogen lamp. This reduces lighting costs by $2091 per set over the course of a set's 36,000-hour lifespan.

Wide Range of Applications: This powerful light can illuminate a variety of applications, including closets, kitchens, hallways, doors, basements, and more. It can be dimmed smoothly from 5% to 100% and is compatible with most dimmers.

Reliable Safety: Aluminum light that offers corrosion protection and rust avoidance, ETL-listed safety requirements, and sponge gasket that significantly enhances the sealing performance make this the ideal light for your roof and ceiling.#

We opted not to use conventional "can" lighting when constructing our basement. We decided on these 6" thin, 3,000k warm light emitting, dimmable dics. They produce a warm, pleasant light that is 100 Watt equivalent before being dimmed, and they look great when placed.Here are some lessons we discovered:1. Make sure the light location is clearly identified when your electrician runs the cable that will be hidden by drywall (or other ceiling material)! Installers of dry wall must maintain the placements of the lights with a visible nail or something similar. Additionally, make a note of the placements of the lights on a map of the ceiling. Measure the distance in inches between the two objects.If you didn't take adequate note of the 110 wire and light positions, you'll regret it. To find the 110 wire for two of our lights, we had to dig around. That was tedious and unpleasant.2. It is quite easy to use a 6" hole saw to create a flawless cut in the ceiling once the light locations have been accurately noted or located. Reach inside for the wire, connect it inside the junction box provided, attach the output wire to the light disc, and then place the disc into the 6" hole to complete the installation.3. Select a dimmer switch that is compatible with Lutron LEDs if you want to utilize one. That switch will function normally as it decreases from 100% to roughly 5%.4. TORCHSTAR offers both direct sales on Amazon and "other buying alternatives" on the site. Although there may be a small price difference, the lights are the same. I was able to get all the lights we required by shopping at both stores.5. My electrician who installed the lights was so pleased that he is now purchasing similar lights for some of his other clients. He enjoyed the appearance, ease of installation, and quality.

When using 9.6 watts, EXTREMELY BRIGHT DIMMABLE LEDs can produce 675 lumens with an 80 CRI, or nearly 70 lumens per watt. Compatible with several Lutron, Levitron, Synergy, and Sensor Switch dimmers, dims down to 10%.

SAVES MONEY AND TIME CHANGING LAMPS: Energy Star-rated bulbs have a strong light output while using little energy and have a lifespan of 36,000 hours, or 16 years, when they are used six hours per day, every day.

A 4.2-inch ceiling hole and 2 inches of ceiling space are all that are needed for an LED wafer recessed light to fit with a UL-recognized driver.

EASY AND SAFE INSTALLATION - An revolutionary, slender design enables simple installation from below the ceiling for retrofit, remodeling, or new construction. Installation just requires a 2" clearance.

HIGHLY RATED FOR MULTIPLE LOCATIONS - CSA, IC, Airtight and Wet Location mentioned make LED Wafer excellent for indoor and outdoor residential, hospitality, commercial, and multifamily applications, as well as safe to contact insulation.#

The ceiling in my kitchen is fantastic! I'm quite pleased with how this thing seems. Four 1970s fluorescent T12 fixtures were removed and replaced with these recess LEDs by my father and me. My father, a former electrician, has never used these before but found it very simple. He was astounded with the development of "recess cans." I looked at a video on installing these online. We couldn't believe how easy it was. They were so well received by my father that he now wants to install them in his home. There is no buzzing after we put 2 sets of dimmer switches (2 above the sink area and 4 in the main ceiling recess). Make sure you purchase a dimmer switch of high caliber. Your ceiling doesn't have to be completely torn apart in order to hang massive "recess cans" for stunning, modern lighting! I was having nightmares about the things we would have to rip out of my ceiling to install recess lights. I'm so happy I discovered this stuff!