Exceptional Coaxial Splitter. The F-type connector and zinc die-cast housing with nickel plating are more stable, resistant to rust, and weather. Get your long-lasting, premium grade product.

2.5GHz) Coax Splitter, 5-2500MHz. For CATV, satellite TV, antenna systems, the internet, and MoCA configurations, Tolmnnts' digital coaxial cable splitter is made.

The package contains the following:Coaxial splitter, 2 screws, 2 screw plugs, and user manual are all included.

High Signal Gain. For better performance, the inside circuit board has a high shielding structure. This can lessen packet loss for modems and all other devices, minimise digital noise, and improve signal quality.

Simple to Use It can be much simpler to connect to your satellite because all coaxial ports pass power.#

I assumed that my TV signal reception was good, but I didn't understand how bad it really was until I upgraded to the Tolmennts Splitter. The over-the-air TV signals weren't reliable; channels frequently dropped, and the signals would pixelate when I passed by the TV. All of that changed when I started using the Tolmnnts Splitter; I now have crystal-clear signals from more than 100 local channels.

5.1 surround sound output on my Windows 10 computer was giving me trouble. PC-HDMI-TV-HDMI-Surround sound was my setup. I set it up this way so I could utilize the TV speakers instead of the surround sound when my wife was asleep. Even though my TV has a pass through to output 5.1 surround sound, the issue is that Windows 10 will only recognize the TV's speakers and broadcast that audio. According to my investigation, windows has had this issue for the past two years. I currently have a PC-Splitter with HDMI 1 going to the TV and HDMI 2 going to surround sound. Sound is excellent. The television takes over when the surround sound is turned off, and the TV speakers aren't active at this time. It performs better than I anticipated. While surround sound was turned on, I initially believed I would need to turn the television's sound all the way down. If auto isn't working for you, just turn the television volume all the way down.

Your text will be rewritten by QuillBot. Start by typing or pasting something into this box, then hit the enter

I specifically purchased this item to get around HCDP on my PlayStation 4, and the splitter did this without any issues. Of course, I didn't do it to steal stuff; instead, my PS4 opted to entirely block the signal after experiencing a significant miscommunication with my 2007 Gateway monitor. I eventually started looking into HDCP bypass after trying every trick in the book to fix the problem, and now here I am. I compared customer Q

A single digital signal is split into two outputs, each of which is balanced and has power pass-through on all ports.

Distributes a digital signal with a frequency range of 2. 5 GHz (5-2500 MHz).

This digital coax splitter is multifunctional and may be used with cable TV, amplified antennas, amplifiers, high-speed internet modems, HD TV transmissions, satellite TV, and other coaxial devices.

Connectors that are gold-plated provide the best connectivity, are resistant to corrosion, and work with both RG59 and RG6 coax cable.

If you have any questions or concerns regarding your purchase, free technical help based in the United States is accessible. Satisfaction - Backed by a limited lifetime warranty.#

The performance of this 4-Way Coaxial Splitter is superior to many others. Internal signal losses are quite little. Of course, dividing the input power into four outputs results in some losses.The fact that the internal losses were minimal enough to still power 4 TVs from an attic antenna and deliver signals for more than 60 OTA channels pleasantly surprised me.Given the extensive RG6 wire runs, I had anticipated needing a booster amplifier. My antenna is 75 feet away from the main wiring closet, and the distance to the farthest TV is up to 85 feet. The TV with the greatest distance has an Amazon TiVo Bolt, which receives all channels without pixelation.I recently cut the cord and use an Amazon Roku for a variety of OTT video services, but I still wanted access to a number of our local stations that are not available on any OTT service. The splitter works as intended.

Hdmi 1. 3; compatibility for HDCP; 480i/576i/480p/576p/720p/1080i/1080p Plus 3D

Watch HD for a year

Please note that this VHD-1X2MN3D will not produce any video if the HDMI source and the monitor are both 4K devices. since HDMI V2 is NOT forward compatible with it. 0. When the source or the display are both HDMI V1 devices, it will function. 3 /1080p unit.

Edid duration: 4 seconds; CEC is not supported by this model

HDMI cable maximum extension: 10 metres for 28 AWG wire and 15 metres for 26 AWG cable

With a sturdy metal jacket and a universal 100V to 240V power adapter with a US plug.#

It performed just as I required. My four-year-old HDTV suddenly failed to display any video and gave me a copywrite violation warning, thus I required this to remove some kind of encoding that I honestly don't understand. Remember that all I was doing was displaying the image from my cable box on my TV, as I had done for years. I'm clueless as to what transpired or what went wrong. It was my same TV using the same cable box, and it suddenly became essentially worthless. I wasn't trying to hack anything or get around any systems. However, after connecting this splitter between my cable box and TV, my TV is once again operational. Once more, this is not a recommendation to use anything improperly or in violation of any copyright. It appears that this splitter corrected a signal error that occurred with either my TV (a Mitsubishi) or my cable provider.There are two things to consider. One is that it does need a power source, so prepare appropriately (power cord included), and when it is turned on, there is an extremely obnoxious loud neon blue light. Therefore, you should either position the TV properly or consider covering it with black tape when viewing TV in a dark environment.

bandwidth of 1 GHz

The product known as the splitter/combiner has two possible uses.

Make use of as a signal splitter or combiner

Insertion loss of 4 dB

2-Way

The 1 GHz bandwidth of the Channel Plus bi-directional splitter/combiners makes them perfect for coaxial cable or antenna operations.

ideal for operations with antenna and coaxial#

VERY VERY VERY HAPPY. You say, why? Well, I've been attempting to receive a television station that is located due East of me while also receiving other well-known stations located due West of me. I had spent a lot of money on an antenna with movable pieces that could face in different directions. For me, it didn't work. So, after looking over instructions on how to connect two antennas, a choice had to be taken regarding what was required to link them. At last discovered this combiner on Amazon, read the reviews, and placed the order. I didn't have high expectations for this to succeed. I started by lining up my East-facing antenna and gauging the strength of the signal. I then adjusted my west-facing antenna to ensure that all anticipated channels were being picked up. The East line coax was next attached to one of the CHANNEL PLUS 2532's ports, and the West line coax was then linked to the other port. When I turned on the TV, I was prepared to see no signals or weak signals on several channels. To my astonishment, I managed to receive three additional channels from the state to the north of me in addition to an image that was crystal clear and reliable. I'm ecstatically joyful. 😀

If the second HDMI device had sound, which I have been unable to get it to, I would have given it a perfect score of five stars. When not connected through this device, the sound functions perfectly. It would be fantastic if it weren't for that very significant issue.Okay, so after writing that, I realized that the issue appears to be with my Dish Network box. To get it to function, I had to go into Dish and change some audio setting. The splitter performs admirably.My only gripe right now is that this box's power supply and all of the really bright LEDs on it are a little distracting. Black tape fixes that, so it's only a minor issue.

Simply plug it in and start using it: package Included are a 5V AC converter, an HDMI 1x2 splitter, and one user handbook.

A single source's audio and video signal can be concurrently sent to two HDMI screens with the Hemi Splitter 1 in 2 out.

Support Blu-ray 24/50/60FS/xvycc, deep Color 30bit, 36bit, and Ultra HD 3840 x 2160 resolution and 3D. LPCM, Dolby-AC3, DTS7.1, DSD/Dolby True HD/DTS-HD Master Audio are among the audio formats supported. In essence, all audio options are supported.

4K @ 30Hz - image in perfect clarity You cannot extend PC monitors using this equipment. Only the signal will be duplicated. gives you the option to play the same film in two different rooms.

Compatible with HDMI 1. 4/ 1. 3/ 1. 2, supports HDCP 1. 4 (won't circumvent HDCP), and is an HDMI splitter with Tec hole that works with the majority of devices that have a standard HDMI interface. Input devices include computers, Xbox 360, Xbox One, PlayStation 3, PlayStation 4, Fire Stick, Blu-ray DVD players, satellite receivers, Route Roku, Chromecast, PCs, and projectors. Display options include HD-Ready, Full HD TVs, Apple TV, Samsung TV, and monitors.#

trustworthy and sturdy. Have been utilizing one for some time now between our kitchen and living area.The HDMI transmission is briefly interrupted when the second display turns on for a period of 2 to 3 seconds (perhaps due to HDCP or another type of handshake), but it always returns to normal in less time.The video resolution is 1080p@60. I haven't experimented much with different audio modes. We just discuss fundamental PCM.Recommended.

To connect the switch to my son's gaming console, our Blu-ray player, and our TV, I utilized three lengthy HDMI cables. To power the switch, I used the included USB cable. It is made of metal, which makes it sturdy and it functions effectively. It is excellent that it has a remote to make use of it simpler.

PORTABLE - Small size, 2.5 x 2.1 x 0.5 inches/ 6.3 x 5.3 x 1.2 cm (L X W X H), convenient for travel. Included USB cable (requires USB power), no need for an external driver, safe, and environmentally friendly (seller suggests a maximum length of 25 feet for the hdmi cable)

ONE INPUT TO TWO OUTPUTS - This compact HDMI splitter can send video and audio concurrently, without any loss or latency, from one HDMI input to two HDMI monitors. (NOTE: This product just duplicates; it does not expand monitors.) (The device does have a USB-micro USB connector, but no 110v power supply)

Support for 4K, 3840x2160p, 3D, 480i@60Hz, 576i@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 1080P 24Hz 3D/720 60Hz, and 4K@30HZ is provided by 4K Ultra HD Resolution. The frequency [for 4K resolution] cannot be greater than 30Hz. NOTE: HDCP 2.2 is not compatible.

SUPPORT - Support HDCP compliance, HDMI v1.3/1.4 ( version 1.2 ). Deep color 30 bit/36 bit support. a format for audio support Dolby-true HD, DTS-HD, LPCM 7.1, DTS, Dolby-AC3, and DSD-HD (HBR)

PACKAGE CONTAINS: 1 * [1 in 2 out HDMI splitter], 1 * [USB cable (usb power adapter not included; please plug the usb into a wall outlet, not a cable box, etc...)], and 1 * High Speed HDMI Cable.and include the greatest after-sales support.NOTE:If you have any questions, please don't hesitate to contact us by email at linkscs01@foxmail.com. We'll do our best to help.I'm grateful.#

To mirror my ROKU to two TVs, I purchased this. Works Perfectly. decided to purchase a GANA HDMI to RCA converter so that more TVs could be mirrored. mirror six TVs with my ROKU. On my main TV, I'm utilizing an HD HDMI splitter. The other leg is attached to an ABC Switch, which transforms the RCA signal into Coax, and an HDMI to RCA adaptor, which is connected to both of these devices. Compared to the HDMI TV, there was no discernible latency on the closer coaxial TVs. On the farthest TV, there is only a slight visual quality reduction and minor lag. I don't care too much about the photo quality on this one because it's in my garage.