Best Sewing Interfacing in 2022

Finding the best sewing interfacing for your project can be a daunting task. There are so many different types of interfacing on the market, it can be hard to know where to start. To make the process easier, let’s look at what interfacing is, what to look for when choosing the best interfacing for your project, and some recommended brands.

What is Interfacing?

Interfacing is a layer of material used in sewing between two layers of fabric to give the garment structure and stability. It is used to stiffen collars, cuffs, and other areas of the garment where you need extra strength. It can also be used to give a smooth finish to edges and seams, as well as add a protective layer between two pieces of fabric. Interfacing comes in different weights and types, so it’s important to choose the right one for your project.

What to Look For When Choosing Interfacing

When choosing the best interfacing, there are several things to consider. First, you’ll need to determine the weight of the fabric you’re using. This will determine the weight of interfacing you need. You’ll also need to decide what type of interfacing you want to use. There are woven, non-woven, and fusible interfacings, among others. Each type has different characteristics that make it better for certain projects.

Once you’ve determined the type of interfacing you need, you’ll want to look for one that is easy to use and won’t distort or shrink your fabric. The interfacing should also be easy to iron without sticking.

Finally, you’ll want to look for an interfacing that is of high quality. Make sure it is made of high-quality fibers and is colorfast.

Recommended Brands

There are several high-quality brands of interfacing on the market. Some of the best brands include Pellon, Bosal, and Vlieseline. All of these brands have a wide selection of interfacings in different weights, colors, and types.

No matter what type of project you’re working on, it’s important to choose the best interfacing for the job. Start by looking at the weight and type of fabric you’re using, and then look for a high-quality interfacing that is easy to use and won’t distort your fabric. With these tips, you’ll be sure to find the best interfacing for your project.

1. Precision Fusing Mat (12" x 18") Includes Non-Slip mat with See-Through Design for Appliqué Creation, and Bonus Teflon Coated Pressing Sheet!

Precision Fusing Mat (12" x 18") Includes Non-Slip mat with See-Through Design for Appliqué Creation, and Bonus Teflon Coated Pressing Sheet!

Informations:

SPECIALIZED NON-SLIP MATERIAL: Prevents mat movement with non-slip material, keeping textiles in place while ironing

Amazing non-stick surfaces safeguard your fusible, allowing for repeated heating.

Includes a pressing sheet with a Teflon coating that measures 12" x 18" as a bonus!

Innovative design allows excellent visibility for appliqué production, and the wide 12" x 18" mat provides enough of space to work.

100% SATISFACTION GUARANTEE: We will refund your order if you are ever dissatisfied with the product. We provide hassle-free returns. The customer support team at Precision Quilting Tools is based in the United States!#

Review:

This mat is a fantastic addition to my raw edge applique equipment. On the route to the ironing board, the design elements now stick to the mat.Additionally, I can create designs with overlapping pieces without worrying about their shifting as I carry them to the ironing board. I also use it with my lightbox, which makes working with appliqué designs much simpler. Awesome appliqué mat for a reasonable cost.

2. Fusible Fleece by Pellon: 45"x60"

Fusible Fleece by Pellon: 45

Informations:

This bundle of fleece, which is 45" x 60" fusible polyester in pig white, adds softness to sewing projects for crafts, home decor, and clothing.

45"x60" Pig White Pellow Fleece Fusible Polyester

Pellow fleece is fantastic for making crafts and home decor of many kinds.#

Review:

For my sewing endeavors, Pellon Fusible Fleece is my favorite. The fusible performs admirably and is simple to use. It adheres to the fabric incredibly well and has the ideal level of stability. Several zipper bags and a sweet sewing machine cover were made using it.

3. Pellon Shape-Flex Woven Interfacing-15 X2 Yards

Pellon Shape-Flex Woven Interfacing-15 X2 Yards

Informations:

Use this iron-on woven cotton interfacing with light to medium weight knit and woven fabrics.

It offers precise support and works well for garment detail areas like pockets, cuffs, and collars.

USA is the country of origin.

The final products can be dry cleaned or machine washed and dried.#

Review:

When my client cut her pillow cover, she asked me if I could fix it. I agreed and used this fusable lining to close the slit on the wrong side of the fabric where it was cut. worked perfectly. Client content.

4. HeatnBond Lite Iron-On Adhesive, 17 Inches x 35 Yards

HeatnBond Lite Iron-On Adhesive, 17 Inches x 35 Yards

Informations:

Does not clog needles; does away with pinning

Applied to cloth

Permanent; Heat triggered; Double-sided adhesive

HeatnBond Lite is a roll of double-sided adhesive that can be ironed on and sewn to attach fabric without adding weight or stiffness.

Use it in place of pinning or basting, and stitch straight through the layers of fabric that are bonded to it.#

Review:

I've used "heat 'n bond" before, and I'll be using it to apply some Christmas motifs as well as to make a pineapple quilt for a friend.

5. HeatnBond Hem Iron-On Adhesive, Super Weight, 3/4 Inch x 8 Yards

HeatnBond Hem Iron-On Adhesive, Super Weight, 3/4 Inch x 8 Yards

Informations:

Creating a tidy hem without sewing takes only a few seconds.

Heavy textiles like heavy cotton, denim, suede, wool, and corduroy are considered super weight.

Permanent; Heat triggered; Double-sided adhesive

Using iron-on, double-sided adhesive, you can hem clothing and home decor quickly and permanently without stitching.

On this roll, there is no backing or lining paper.#

Review:

Since I'm not a talented seamstress, I had no idea how to use them to hem my coveralls, which turned out to be too big for me. However, I didn't want to pay the same person to hem all three pairs, so I used these instead, and I have to say it worked out really well. I will admit that I don't clean my coveralls as frequently as I should, but the seam holds up nicely and hasn't come apart with washing. Simply cut the seam to the proper length, insert this, and then fix with an iron by applying heat. If you wanted to finally go back and sew in a good seam line, I will advise that it might be a little too thick. As a result, you might need to either buy thinner or cut it down to whatever size you desire.

6. HeatnBond UltraHold Iron-On Adhesive Value Pack, 17 Inches x 5 Yards

HeatnBond UltraHold Iron-On Adhesive Value Pack, 17 Inches x 5 Yards

Informations:

Not required or utilized to sew

The no-sew bond of Ultrahold outperforms conventional fusible webs in strength.

Edge-to-edge coverage without puckering or bunching is provided by solid sheet adhesive on paper backing.

Permanent; Heat triggered; Double-sided adhesive

intended for use on fabric, but it can also be applied to a variety of other surfaces, including foil, lame, felt, suede, cardboard, leather, and wood.#

Review:

If you want Heat 'n Bond in this area, you purchase these tiny containers that contain enough to create one fabric snowflake. I required a lot more snowflakes this holiday season because I had an excellent run of them. It was really easy that I could order these products from Amazon and, owing to Prime shipping, have them arrive at my door in a matter of two to three days.The single aspect of any Head 'n Bond product that I don't like—and this applies to all of them—is that they only come in 17" widths, when almost everything else comes in even numbers—1/4 yard (9 inches), 1/2 yard (18 inches), etc. I've learned how to piece it together to match my projects in order to get around that issue, but it really would be convenient if it came in a different width.

7. HeatnBond UltraHold Iron-On Adhesive, 5/8 Inch x 10 Yards

HeatnBond UltraHold Iron-On Adhesive, 5/8 Inch x 10 Yards

Informations:

intended for use on fabric, but it can also be applied to a variety of other surfaces, including foil, lame, felt, suede, cardboard, leather, and wood.

Paper backing with solid sheet adhesive gives

The no-sew bond of Ultrahold outperforms conventional fusible webs in strength.

Permanent; Heat triggered; Double-sided adhesive

Not required or utilized to sew#

Review:

A little trial and error was involved. For instance, avoid over-ironing because it causes the tape to totally melt and permeate into the cloth. So there's no sticking. Apart from that, I managed to make it work. (I don't particularly enjoy ironing.)

8. Pellon PLF36 Ultra Lightweight Fusible Interfacing, White, 15" x 3 Yards

Pellon PLF36 Ultra Lightweight Fusible Interfacing, White, 15" x 3 Yards

Informations:

Use in quilting crafts as a stabilizing agent

White Ultra-Lightweight Pellon-Fusible Interfacing

For light to medium-weight fabrics, a very thin interfacing

made of 100% polyester

Crepe de chine, voile, and handkerchief linen fabrics are excellent choices for wovens, knits, blouses, and sheer clothing.#

Review:

fantastic stuff Even though I am the "family seamstress," it was difficult to patch the seam where my brother's niece tore the romper since it was so thin. With the help of this product, I was able to repair the damaged seam. Very thin and moves with the cloth.

9. SINGER 00240 Heavy Duty Iron-On Fusing Web, Fabric Adhesive

SINGER 00240 Heavy Duty Iron-On Fusing Web, Fabric Adhesive

Informations:

A fusible iron-on adhesive web is the product, and it can be used to fix hems, facings, trimmings, and other items without sewing.

amazing for hems

Two pieces of fabric are joined with an iron-on strip.

Simple application

Heavy-Duty grip for patching seams and fixing cloth tears

Using Singer heavy duty iron-on fusing web, which can be steam pressed, is a no-sew remedy for securely joining thicker fabrics like denim, corduroy, or twill.

3/4" x 8 yds#

Review:

for the first time. I wasn't sure what to anticipate in far of hold quality.I must be honest.Since I use a heat press for my transfers, I had a significant edge.made five sets of labor pants.Not paying a tailor to hem saved me a ton of money.I anticipated the tape to be thick and weighty.On the other hand, it was thin and made five pairs of work pants from one roll.even double up.Time will tell, however at this time, hemming was excellent.
About Author

Matt Grabowsky

My name is Matt Grabowsky and for over two decades I have been observing technological and social trends, talking about them and explaining them in an accessible way.