Utilizes three velcro straps for a quick attachment to the golf cart railing.

Portable speakers up to 12 inches in circumference are compatible with an adjustable velcro strap.

The mount and speaker are kept firmly in place by the non-slip coating.

comprises one strap. Speaker is not present.

An inch and a half of cushioning absorbs shock to stop the speaker from rattling.#

Although I'm sure it serves the stated purpose well and is of high quality, I had hoped to use this to attach a speaker to the crossbar of my canoe. The velco apparently won't go all the way around because those are considerably bigger than the bar this mount was designed for. Velco is somewhat shorter than I had anticipated; I wish they had produced a model with longer straps for more uses.

The first outlet mount for the Amazon Echo Dot is called the Dot Genie (3rd generation). Do Not Trust Others!

The Dot Genie is as basic as it can be without sacrificing essential functionality or going over budget!

Tell people you have The Dot Genie when they inquire.

The third-generation Echo Dot's cord is kept neatly tucked away by the Dot Genie. Delete those unsightly, lengthy cables.

The Dot Genie makes your Echo Dot 3rd Gen even better by enhancing visual AND microphone reception over flat surface placement!#

Though it is totally stable, I wasn't sure if mounting on a wall in this manner from a plug would actually work. Several considerations to make when choosing a site 1) The second plug on the outlet is pretty useless; if you have a little plug to use for the second outlet, perhaps, but a conventional nightlight would not fit there, whereas the transformer plug for a shaver and the nightlight did before. 2) Pay attention to the plug's orientation in your outlet; if it is not vertical, the outlet is put under a lot of twisting pressure as opposed to hanging vertically. 3) Be mindful of what is situated beneath the area from which the Alexa frame will hang. If in a kitchen or bathroom, it can obstruct the counter's backsplash.The Echo is kept off the floor and counter by this excellent supporting bracket.

Up to 33 lbs. supported; cable management

Construction of heavy-duty steel with a wall plate cover. Standard mounting tools and an instruction manual are provided.

A pair of speaker mounts with side clamps

The clamp is adjustable from 5.3 to 11 inches.

Simple installation, adjustable tilts of 10 degrees up or down, and 360-degree swivels#

Works Excellent for center speaker mounting, too! The middle channel is mounted using one PAIR that I have. Since the center speaker is situated above the TV, I wanted to be able to slightly incline it downward toward the audience. For my Hsu 5.1 system, which is a great system and unquestionably an outstanding value for the money, I needed strong mounts. Since they don't actually promote, word of mouth is a big part of the hype surrounding the speakers.In any case, you require a pair to get the mount to work for a long center speaker, and you lose the ability to rotate the speaker but get the ability to tilt it, which is what I wanted. For comparison, my center speaker is a little over 23 inches "It is around 25 pounds long and weighs that, and the two mounts are holding it without any problems. Although the screw/clamp mechanism is pretty solid, I did apply blue tack sticker glue to fully secure the speaker to the two brackets. However, you probably won't need this. I do regret it a little bit, though, as the speaker is now extremely glued to the two mounts, and I'll have to take the mount apart in order to free it. In other words, if you use blue tack, be prepared for it to be really stuck in that position unless you try to remove the speaker by pulling off the rotating portion of the mount.Since there were no nearby studs, I had to place some of the mounts using the True Grip drywall anchor system. These mounts are quite solid; if secured to the studs, I imagine they could hold 50–60 pounds with ease. I would be hesitant to use more than 25 to 30 pounds with the real grip triple action drywall anchor system so that you have a reasonable margin of safety for each mount.Everything is quite robust, including the Hsu bookshelf speakers that are mounted on these and anchored to studs and drywall anchors.For these incredibly adaptable mounts, the price on Amazon is pretty hard to beat, plus with prime shipping, you get it in one or two days!FYI, the 65-inch TV underneath "LG OLED B6P has a gorgeous display! If you're thinking OLED, this TV has a ton of value because its more expensive siblings barely improve visual fidelity or picture quality.

These appear sturdy enough for any bookshelf-size speaker and overkill for mine when two of the wall mount nuts are secured in studs. Don't get this if you want cheap surround speakers (that's not a complaint). Functional appearance with neat edges and welds.With all required bolts and drywall anchors included, installation was simple. You will need to drill holes for drywall anchors and/or stud pilot holes.With my small speakers, pivoting L/R and U/D works fine, although regular repositioning may be laborious (or the castle nut may be switched out for a wing nut). The position must be locked-down by a nut (wrench provided). Since the pivot point is around 8 inches from the wall, speakers with a depth of more than 12 inches may tip over and put stress on the clamping screws.a product that was well constructed, paying attention to the production and instructions.

DESPITE SERVICE Problems with pre-purchase and installation are resolved by a qualified support team. The sound bar bracket can be mounted directly to the wall. If necessary, lag bolts and concrete anchors will be shipped.

The majority of sound bars are compatible with the sound bar mount bracket. It fits most TVs up to 600x400mm and is universal for most sound bars with holes or without holes. Most fixed, tilted, and full motion TV mounts are compatible with this sound bar bracket.

FLEXIBLE HOLDER: Sound bar TV mount flexible base holder extends 6.06" and retracts to 3.44," fitting various sound bar widths from Sonos to Vizio to Samsung to Yamaha.

Easy installation is provided, along with decent instructions and essential hardware. If the sound bar is shorter than 34" and the TV VESA is smaller than 400x400mm, it can be fitted with just one horizontal bar.

SOLID LOCKING MECHANISM: By using safety bolts to lock the extensible holder and using special material for the bracket, the sound bar TV wall mount prevents wagging.#

my full motion tv mount works well. I used it with my 55-inch Samsung Curved TV and Samsung Sound Bar. It's excellent that it can move with the TV so it's not stagnant, in my opinion. From wherever the TV is facing, the Super Bowl party will be fantastic and sound fantastic.

Let me begin by mentioning that this is functioning great for me and that I haven't run into any problems yet. To make this product even better, I believe some design changes are needed. For instance:- The long cord at the back of the Google Mini is difficult to wind. The cable must be essentially shoved at the back and is done manually. That gets me to my second concern, which is that the holders at the back are fragile; while trying to cram that long wire into the back, I actually snapped one of them. Provide a tiny cable that can replace the long one so I won't need the lengthy cable, OR make it easy to wind the cable and secure it in the rear.- Thirdly, I wish the socket could rotate so that I could easily spin it and put it how I wanted.My wall outlets in the bedroom are not at a comfortable height from the floor, so I struggled. The top plug was previously occupied by something large, and I am unable to rotate the socket 180 degrees since it contacts the ground. I could have put this at a 90-degree angle if the socket could rotate.However, I was able to make it work, and so far everything seems good. I'm confident that if you fix a few of these flaws, your product will be much nicer to sell.

Dual sound bookshelf satellite speaker mount brackets are compatible and designed to be installed on stud, concrete, or brick or stone walls. Maximum weight: 55 lbs (25kg).

Durability: A strong, vibration-free mount to the wall is provided by the metal interior construction.

Sleek: For a modern aesthetic and the best listening experience, the current knob design is complimented by a sleek reinforced black finish.

2 WALI Speaker Wall Mount Brackets, 1 Mounting Hardware Kit, 1 User Manual, and 10 Year Protection are all included in the package.

Flexibility: Modifiable Adjust the speaker's tilt by 7.5 degrees up and down, 45 degrees left and right, and 5.3 to 11 inches in width.#

A sizable set of Klipsch RB-61 reference bookshelf speakers were acquired together with these WALI bookshelf speaker wall mounts. The speakers are approximately 18 lbs apiece and are 12.3" (D) x 8.5" (W) x 15.4" (H). It was important to choose a wall mount that could accommodate their size and weight. I didn't want to purchase anything that might cause the wall to bend or pull away. Additionally, I didn't want to attach support screws to the speaker's side to keep it attached to the wall mount. I wanted to keep these speakers looking brand new because they are.I carefully considered all of the mounting brackets on Amazon before choosing the WALI brand, largely because of the favorable reviews. I'm so glad I did!Yesterday, the mounts arrived, and I put them in right away. They do have to be put in wall studs, as several commenters have said. Hardware is provided for mounting into brick and wood. They do not allow mounting into concrete block or metal studs. You'll have to supply your own mounting solution, but you probably can.The speakers' installation was simple. Locate the studs using a stud finder, install the mounting plate on the wall, mark the holes, drill small pilot holes, and then screw the mounting plates into the studs. For the two wood screws that are included, the plate contains two screw holes. One is tall enough to insert the screw with an electric screwdriver or drill. The support arm is not far from the other screw. To drive the screw close to the support arm with my drill, it was too big. It took some considerable labor to hand-screw that screw. This makes at least the mounting hole by the support arm require a pilot hole.I was really delighted to see how the speaker was secured to the mounting bracket. Each speaker clamp has an adjustable screw, one on either side of the position the speaker will be in. These screws can be tightened or loosened to move the clamps in and out. In order to hold the speaker, these clamps apply pressure. I put a speaker on the mount and tightened the clamp after attaching the mounts to the wall (which took about an hour), and it held the speaker perfectly! The clamp was securely tight enough to hold the speaker even with 35 lb speakers. My speakers are pitched somewhat downward and positioned quite flatly. The clamp features screw holes that might be used to attach screws to the speaker's sides, but I discovered that this wasn't essential for my installation. By the way, the speaker mounting come with the screws needed for this. You don't have to buy the screws if you don't need to install them with the additional screw support.I'm quite happy with this purchase. Our speakers are securely supported by the supports, which are made of sturdy, high-quality metal. Adequate paperwork was also provided. The best part is the great pricing. What else could I possibly want?

Heavy strength and universal sound bar mounting brackets can support sound bars weighing up to 22 lbs (10 kg). Note: L-shaped brackets are necessary if the soundbar is placed from the bottom. On request, L-shaped brackets are available.

Fits universal soundbars and is wall mount friendly (fixed, tilt, full-motion mount). 200x100, 200x200, 300x300, 400x200, 400x400, and 600x400mm TV mounting holes are acceptable.

With clear instructions and all included hardware in labeled bags, the "100% Purchase Guarantee" is offered. Your pre-purchase and installation queries are answered by US-based customer service. We provide a 10-year warranty on our sound bar attach bracket!

The sound bar is simply secured above or below the TV using a tool-free knob, and the teeth on the arms' connections serve to lock the sound bar firmly in place while also providing a neat appearance and saving space by preventing the need for screw holes in the wall.

According to the distance between the TV's bottom hole and the sound bar hole, brackets can be put together in a variety of ways, including long short, long long, and long long short. provides greater mounting versatility by allowing a 180 degree swivel.#

As a result, I simply used this to attach a Sonos playbar to the back of a Sony 65-inch TV. Thankfully, there were already holes there for the TV stand, which I used in place of the VESA holes for the wall bracket hooks. My mistake—the customer didn't have a Sonos bracket. I attached the bottom of the bracket to the playbay using the two nuts and screws I had on hand, then screwed the top of the bracket into holes on the back of the television. For reference, I also used a small metal washer to prevent the playbar from pulling the bracket downward. The client was pleased with the installation. The customer had a sonsos bracket for a plabar this time, so I attached it to the playbay bracket and positioned it underneath a tv bracket. I also added a small washer to the top of the tv bracket hooks to balance out the space difference at the bottom of the hook caused by this bracket. The pictures show before and after pictures. I also installed it on a 49-inch Samsung with a mount it single arm tv bracket.

Every day of the week, our experts are ready to assist. For all the many ways to contact US-based, in-person product experts, visit our website or consult your product handbook.

In case you're crazy about that interior design, the low profile design, available in black or white, matches your Echo Dot (3rd Gen) and blends in well with any type of décor.

Your Echo Dot (3rd Gen) stays safe and secure on this mount no matter where you place it—on a wall, beneath a cabinet, or even upside down. In the event of an earthquake, yes. (We believe.)

Specially created "Made for Amazon" attachment for use with Echo Dot (3rd Gen). Third-generation Echo Dot is offered separately.

Installation is quick and simple and takes around five minutes. We all know that time is money.

Your Echo Dot (3rd Gen) will be mounted in minutes thanks to a SUPER EASY installation. For peel and stick installation, use the 3M Command Strips that are provided. Want something more long-lasting? For wall mounting on drywall and wood studs, screws are included in the box.#

Although it has only been a few of weeks, so far so good with it staying in place, it appears as though it will remain in place for a while. What I like about the echo mount is that it was really simple to install. I installed it beneath my kitchen cabinet, where you can hardly see it.

FOR GENERAL AUDIO IMPROVEMENT, MULTIPLE BRACKET CONFIGURATIONS are made to fit the majority of sound bar installations in a below- or above-TV position.

FIXES TO VESA holes for easy mounting are provided on the back of your TV. most 23" to 65" flat screens will fit

UNIVERSAL SOUND BAR compatible with the majority of VIZIO, SONOS, and SONY sound bars. The modern bracket style fits any soundboard layout.

A 33-pound weight capacity and all-steel construction ensure a safe mounting of your sound bar.

A SIMPLE ASSEMBLY PROCESS is followed with all required components and instructions to set up and mount your sound bar.#

Although it has only been a few of weeks, so far so good with it staying in place, it appears as though it will remain in place for a while. What I like about the echo mount is that it was really simple to install. I installed it beneath my kitchen cabinet, where you can hardly see it.