2.5 "size of the magnetic base

It adheres to any ferrous metal surface and acts in reverse!

4-1/4 "stainless steel plate

Magnetic base with rubber covering to reduce scratching

ideal for securing fasteners, hardware, and small pieces#

We appreciate you reading this review. Please click the relevant Amazon button below the review if it was helpful. This gives me feedback and improves my ranks.This has always seemed to me to be merely a "gadget" utility. After I purchased one and used it for the first time, everything changed.The top portion is also magnetized in addition to the base. You won't have to worry about losing the components because they rolled off the table or landed in the grass or soil after you removed them from the machine if you simply drop all of the screws, washers, pins, nuts, bolts, and small tools in the tray while you are making repairs to machinery. This magnetic tray is quite strong. You can connect it to any metal surface, and it will remain put. The little components will remain inside the tray even if you pick it up and tip it upside down.Since this is the only one I own and/or have ever used, I am unable to comment on whether it is better or worse than other brands. But I can say that whenever I work on a machine and need to remove bolts, nuts, etc., I ALWAYS USE THIS TOOL.I hope this evaluation aids in your choice. If so, kindly select "useful" from the drop-down menu underneath this review. Have a fantastic day!

I purchased three Craftsman tool boxes and wanted to shield my items from dents as well as the interior of the drawers. I cut the material rolls so they could run along the front and back of the 16-inch "When opening and shutting the drawers, deep drawers with about an inch on each side help prevent tool rolling back and forth. The material lacks the typical holes and is solid. This prevents liquids from penetrating the lining. Rubber is an extremely durable material, around 1/8" thick "thick with the perfect amount of give to hold tools securely. Each of the three 24' rolls I purchased was almost flawless. Use a straight edge instead of relying on the line of the dimples when cutting because the dimples in the material are not quite square with the sides of the rolls. You don't need to weigh them down first because the material lays flat right away after unrolling. One roll's end needed to be flattened out for about 6 feet because it was spooled up and had wrinkles in it.I would unquestionably suggest it to anyone looking for a quality tool box drawer liner. I can use these for as long as I need to.

They have been using the Lisle socket tray for almost 15 years, but they have started to break down recently. Their primary flaw is that whenever you bump them, sockets fall out.These magnetic trays are composed of a very durable plastic that has a waxy texture and is of extremely good quality.My initial assumption was that the magnetic grasp wouldn't be powerful enough, however it appears to be about right. As time passes,I work underneath cars on jack stands because I don't have a lift; these are nice. keep the sockets organized, even when very violently bumped or dropped from low levelssearched for a few years in box stores, online, northern tool, napa, sears, and other places. After I originally saw these, it took me approximately a month to order them.I consider them excellent. I'm going to order a set for a 1/2 inch drive today. They are valuable to own.

They have been using the Lisle socket tray for almost 15 years, but they have started to break down recently. Their primary flaw is that whenever you bump them, sockets fall out.These magnetic trays are composed of a very durable plastic that has a waxy texture and is of extremely good quality.My initial assumption was that the magnetic grasp wouldn't be powerful enough, however it appears to be about right. As time passes,I work underneath cars on jack stands because I don't have a lift; these are nice. keep the sockets organized, even when very violently bumped or dropped from low levelssearched for a few years in box stores, online, northern tool, napa, sears, and other places. After I originally saw these, it took me approximately a month to order them.I consider them excellent. I'm going to order a set for a 1/2 inch drive today. They are valuable to own.

You can avoid running to the hardware shop every time you need to replace a fastener since e-clips are prepared when you need them.

To keep the included clips ordered and organized, the set comes with a plastic storage container.

For practically any application, the kit comprises diameters 1/16", 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4", and 7/8".

Contains 300 replacement e-clips in lower sizes for a range of securing applications around the home or shop.

Made with long-lasting steel that has been heat-treated, hardened, and given greater tensile strength.#

There is always just one more clip to install before you are done. Then it takes off flying and you are never able to locate it! They naturally blend in with the rest of the floor clutter because they are black.This is a great, compact grouping of the most typical sizes. The only way to improve it was if they were a strong shade of orange or yellow.

JSP Manufacturing's 16-Tool Standard Wrench Organizer in Red and Black, 2 Pack

Each Tray can accommodate up to 16 common wrenches (wrenches not included)

Strong and stable Installable with or without double-sided tape or magnetic tape, or with screws in the handy screw holes for wall installation (mounting

I prefer these to other types because they don't "grip" the wrenches; instead, the wrenches just rest in the "U"-shaped grooves, which keep them neatly aligned and allow for easy wrench retrieval without the need for a tool box drawer.

3/4, 3/8, and 1/2 inch sockets

trays made of heavy-duty molded ABS plastic

1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 piece 3/8in socket tray (inches)

4, 45, 5, 55, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 1Pc 1/4in socket tray (mm)

3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, and 5/8 are included on a single 1/4-inch socket tray (inches)#

To help me organize the socket drawers in my tool box, I bought two sets. These were a little less than $15 each when I bought them.None of the sets were broken when they arrived, and the size printing was perfect on all of them. To make the tray fit better in my drawer, I did cut off the end where it would hang using some snips.The middle divider of each tray contains a row on the front and back that lists the sizes.The sockets fit the holders well. Yes, your sockets could spill all over the place if dropped or pushed over because they do not snap into place and this is not magnetic. I am happy with these organizers for the purpose of keeping my sockets organized rather than in a mess in my drawer. Additionally, I was able to arrange some duplicates in the tray close to other items.Finding the size I want is SO much simpler now.

Works with metric and SAE wrenches

Sliding, Flipping, Storing Just like that!

Compact and portable, measuring 13.5" by 10" by 1.5", made in the USA

accommodates wrenches with lengths ranging from 7mm- 1/4" (up to 6.5") to 19mm- 3/4" (up to 9.5").

No wrenches allowed!#

fantastic organizer It carries a lot more wrenches than I ever imagined! Additionally, it has adequate storage for extra wrenches, such as customized and/or tiny wrenches. Infrequently, there is one wrench that is either too short or too long and doesn't quite fit, but it is due to personal items and not the wrench organizer. It firmly contains 99% of the wrenches. I would highly suggest this product and am very happy with it.

Fits all Fuses and Circuit Breakers - Directly apply to the Switch

Ideal for emergencies and power outages, essential for the elderly and disabled.

Labels that are "easy-read" and visible that are both for plugs and lights.

Total of 105 Labels - 2 Sheet Set

24 Blank Write-On Labels and 81 Pre-Marked Labels.#

These foil stickers are quite durable. A few have held up nicely when I've had to remove them from the magnetic strip I'm positioning them on. Please take note that the SAE Nuts were really labeled as SAE Bolts. As a result, there is a row of stickers labeled "SAE Bolts" with the pictures of small, medium, and big SAE bolts on them and another row with the pictures of SAE nuts on them. This is somewhat disappointing because they are really polite and a big help to me.