Multipurpose articulating panel Your TV is placed exactly where you want it using a TV bracket! To get the optimum view, adjust the TV's viewing angle, whether you tilt it downward or point it left or right.For my 55" TV, I thought this articulating wall mount was high-quality and well-made. The 16" centers of the wall studs that this model is intended for. A separate model is needed for studs that are farther apart.1. Drywall by itself will not be sufficient support. The mount is bulky and overkill for a small TV because it was designed for huge TVs.2. Fixing your gaze on a wall. You might not be able to position the mount precisely where you want it if mounting on wood studs with 16" centers. The mounting structure is around 17" in length. Additional materials could be needed for centering.3. To prevent a return, try to get a mounting template from the vendor before making a purchase.Additionally, it can be placed on concrete or solid wood. On concrete-based cultured stone, which I mounted mine on. The stone is not genuine.The need for a "hammer drill" and a concrete-specific hammer drill bit for mounting on concrete may need a capital expenditure for equipment. Typically, tapcon concrete screws can be used to give a solid support by screwing them into the drilled holes. Using wood screws to attach to wood wall studs is significantly simpler. But studs might not always be 16 inches apart.A huge TV will require two people to lift it onto the mount. The wiring could be completed in large part before the lift. After the TV is installed, you do have enough room to add wiring because the mount is adjustable.The mount is discrete and quite small. The television may be easily tilted up, down, or side to side. You must pull the bracket forward as the amount of adjustment increases the amount of wall clearance needed.The directions are quite clear. There are parts available for installing different TVs. Included are several spacers, a level, and a complimentary HDMI cord. Additionally, a template is included to indicate the precise location of the fasteners.

The directions were pretty straightforward. It was pretty easy to put together. In general, handling insulation is relatively simple. One piece of advice is to make sure the Tilt forward bracket is adjusted before mounting your TV on the wall. This will prevent the TV from sagging and possibly tumbling off. To avoid installing a 2x4 too far to one side or the other, make sure you also have a decent stud finder.I truly appreciate the security of this Mount directly into one stud rather than all across a 16 inch measurement for other brackets, and the movement and swivel of the entire bracket are flawless.When the TV was mounted on the wall, the only assistance I requested from my husband was to help me mount the TV on the bracket. With that one exception, I completed the installation all by myself. Therefore, as a woman, I suggest this bracket.

incredible value for the money It went really smoothly once I realized that a standard wrench may be used in place of a socket wrench (I'm continuously expanding my tool inventory). When you get close to the wall with a conventional wrench, it will however catch your knuckles. I had to have the blood stains Mr. Cleaned. I installed and set up the television on my own. I decided I'd handle it alone because I'm a daddy's girl and he typically comes over to help with stuff like this. Simple to install and assemble. Without someone else to support it, mounting the TV was a little tricky, but manageable.The stand has excellent rotation, is quite sturdy, and is a lifesaver in my gym area wherever I am, preventing neck pain.And certainly, since this photograph, the television wires have been buried.

WORLD-CLASS CUSTOMER Care: With a leading 10-year warranty, our customer service representatives in the US are available to assist you every day of the week. Please visit ASIN: B07F9VYT5G for the most recent model with a sliding feature.

Inventive design T mount: TV wall mounts accommodate the majority of 37-70" screens up to 132 lbs., with a maximum VESA 600 x 400mm. You can use the images on the left to check the VESA, TV weight, wood stud spacing, and any potential input blockages. Not flawless? For the perfect match, you can look at various TV mounts from Mounting Dream. the 29/639, 502 patent

Low profile TV wall mount to save space 1. 5" flat profile allows you to put your TV near to the wall while conserving a lot of room.

Simple installation: 3-step installation Wall mounts can be removed for simple installation by one person if the TV mount comes with excellent instructions. comes with cable ties for cable management, a Torpedo level, and a 9-foot Hemi. On request, concrete anchors are available. All of our TV mounts are not just for installation on dry wall!

Reduce glare for better viewing by tilting your TV forward up to 8 degrees.#

I considered a variety of wall mounts before deciding which to purchase. Because many don't have the right bolts, wall mounts for Samsung TVs can be a little more difficult to install. The 8000 Series 65in 2018 model and a number of other manufacturers' products are compatible with the bolts included with this mount. That spared me the need to visit the neighborhood hardware store. I had to tamper with the brackets to make sure they were snug and secure them with some long spacers that came with the TV and a few thin spacers that came with the mount because the back of the TV is curved. The hardest aspect was actually not that bad—securing the brackets. Simply take your time and do it well. Once the mount is level, attaching it to the wall is rather simple. You only need a drill and a socket set to get started. Once it is inserted into a couple studs, it is incredibly secure and the TV won't move. To disguise the lines, I also used this installation in conjunction with the PowerBridge ONE-CK Recessed In-Wall Cable Management System, which also performs fantastically. Very pleased and would purchase again.

Installation was rather simple, with clear instructions and lots of extras like a level and HDMI cable supplied.It certainly shouldn't have taken me as long to put this up as it did, but I had to go buy a stud finder because I didn't have one before. After I acquired everything I needed, the installation probably took 30 minutes.There is a level provided with this wall mount, and there is also a small level incorporated into the mount itself, which is a great touch. When mounting the mount on the wall, this is really helpful.The simplicity of mounting the TV on the mount also pleased me.I don't have to worry about my television falling off the wall once it's up because it is strong.The middle flexible arm is a touch stiff to move, which is the only little issue I have with it. The middle component is a little resistant, but the other two move without any issues. It was only a slight inconvenience, nothing too terrible.

Absolutely ideal given the cost. I have fifty "I mounted my TV on the wall to conserve space. I made the decision to test this little guy because it is at least $10 less expensive than anything I can buy locally. To my surprise, the level that came with it resembles one that costs $7 at Home Depot. The new thing is nicer than my previous one since it locks the TV to the mount with spring-loaded clips rather than screws that you can't get because the TV is in the way.The awful now. Wall anchors were not included with the item. I know what you're thinking: "You stupid, why would you ever consider using anchors to hang a TV from a wall." Well, with the exception of my 70-inch TV, I've done this with every TV I own "TV. What a beast that is.I went to Wal-Mart and bought a $5 package of 90lb self-tapping anchors, then I started working. That object has no desire to collapse.It would receive five stars if it had anchors. Given that, I'm going to go ahead and give it a 5 star because the level demonstrated that the floor, not my shelves, is uneven.

For maximum viewing versatility, tilt 15°/ –5°, swivel 180°, and rotate. The VESA plate can be removed for simple one-person installation.

Low Profile mount extends 20" from the wall but retracts to 2.2" to save space.

HDMI Cable, common mounting hardware, and a 6" 3-axis magnetic bubble level are all included.

Screens up to 88 pounds are supported by heavy gauge steel. conforming to VESA (mounting hole pattern) (16"x16"/16"x12"/16"x8"/8"x8"/8"x4"/4"x4") 400x400mm/400x300mm/400x200mm/300x300mm/300x200mm/200x200mm/200x100mm/100x100mm

The TV can be perfectly levelled after installation thanks to level adjustment.#

When I originally looked at this product, I had a lot of reservations because many individuals had said that it would fall off the wall soon after installation. You should not utilize dry-wall mounts for a hefty TV, potentially a lighter TV, and I cannot emphasize the word "Light" enough. Let me tell you, they just did it badly or like complete fools. Dry-wall mounts shouldn't even be used in the first place since, quite simply, they are unreliable.Back to my experience with the product, though. I have it put around four feet up over my Xbox One. My roommate, who weighs about 150 lbs, hanged off of it for about 5 seconds at the base and it didn't even move after I secured it to a wall stud; now that's a sturdy wall mount if I ever saw one! The mount allows me to extend, swivel, angle, and tilt my 40" Samsung TV however I like.It comes with some really high-quality equipment, particularly the level. The level is quite good for a product add-on considering its intended use. The pieces are all properly and appropriately labeled, and the packaging is well-done. Before you attach the TV adapter to your TV, make sure to use washers on the outside of the mount; they will save you a lot of hassle.Since I've owned this wall mount for a month, I felt comfortable giving it a review. I'll include some images so you can see the TV's motion range, how I installed the adaptor, and the area where it is mounted to the wall. I can enjoy the TV while sitting specifically to the side, turn it to look at my computer area so I can play while chatting with pals on Skype or other chat applications, or set it to look at my bed so I can watch Netflix or Hulu while I cuddle up in bed.I really loved writing this review, and I'd be happy to address any questions you might have.

made of sturdy steel and aluminium for dependable strength

Fits VESA mounting patterns that range from 100x100 to 400x400mm (the VESA mounting patterns are the measurements in mm between the four screw holes on the back of the TV).

For a simple installation, bubble level and all mounting hardware are provided.

For a better experience watching TV at home, an articulating TV wall mount can hold TVs up to 80 pounds and 22 to 55 inches.

The articulating design extends up to 16.3 inches from the wall and can turn 180 degrees from left to right.

The ideal viewing angle requires a tilt of 15 degrees ( 10 to -5 degrees).#

great acquisition would repurchase. In fact, I'm going to purchase a second one.First off, compared to comparable wall mounts in brick and mortar stores and other online retailers, this one is a steal at less than $25.Second, installation is quite simple. I spent roughly an hour and fifteen minutes on it. But since I'm a tidy freak, a big anal, and obsessive about making holes in my walls, it only took me that long. Additionally, no one would return my calls or texts when I asked for assistance mounting my 43-inch TV on a mounting bracket. To do it myself, I had to improvise a ladder and sprout a third arm. My pals are losers.I'm taking away half a star since I don't like how the cover fastens to the bracket's wall component. It doesn't, as far as I can tell, snap into place. It simply stands there. When you gently cover the arm with the cover, it appears to be alright, but because it doesn't snap into place, it immediately falls off when you move the arm. I must purchase some double-sided tape.Edit: Forget it. The cover simply clicks into position. Derp!

Fits most 32"-80" TVs with a VESA 600 x 400 mounting pattern and weighs 165 lbs. BEFORE YOU BUY, CONFIRM the following wall mount tv bracket information.

Flush 2.8" Profile; 5°/-15°Tilt for enhanced vision; TILT, ROTATE FUNCTION.

What you receive - Offer a 5-year warranty period. Please get in touch with us if you run into ANY problems.

Easy setup and all required mounting hardware are included. All installation and mounting gear is provided, and installation instructions are clear. Straps are pulled to easily lock and unlock televisions. Spirit level and an HDMI cable are included as bonuses.

This TV wall mount is compatible with 16- and 24-inch wooden studs as well as masonry; it is not just for dry wall.#

The best value is unquestionably this mount! I put it to use in our main bedroom and was really happy with it. The studs in our wall are offset, and it is a very small wall, so with earlier mounts we could never get the TV centered the way we'd like it. However, with the help of this mount's extension piece it has allowed us to not only perfectly center our television - but also upgrade the size to perfectly fit as well! The kit includes a little cutout stencil that you can use to test where you should drill. It also includes a magnetic level for use while drilling, which is very helpful because I had to mount this to the wall by myself and was unable to hold the level. I couldn't be happier with this purchase and would definitely recommend it—in fact, I might even buy it again the next time I need a mount.

A thorough English graphical installation guide that is genuinely helpful (and even humorous) will assist you to install this full motion TV wall mount without any problem. 30 MINUTE FAST AND EASY INSTALLATION - Comes with all the necessary mounting hardware needed.

Our TV wall mount brackets come with a fantastic 5 years warranty and helpful customer service. Please feel free to email or call us at any time, whether it's raining or shining, if you have any questions.

Please check the VESA pattern, weight, and size of your TV before purchasing. ULTRA STRONG TV WALL BRACKET - Our TV wall mount is constructed from high quality steel materials and fits most 37-70" TVs weighing up to 132lbs, like Samsung, Sony, Panasonic, Thomson, Toshiba, Sharp, LG, Philips, JVC, etc. Solid and sturdy TV bracket with compatible faceplate that fits VESA patterns from 200x100mm to 600x400mm.

ADJUSTABLE OPTIMAL VIEWING - For ultimate viewing flexibility, this premium TV wall mount tilts 10°/–10°, swivels /–60° (max swivel angle dependent on TV size), and levels /–3°. Easily personalize your TV watching experience to discover the most cozy and healthiest viewing position.

Conserve MORE Room - Built with dual articulating arms that, when in the home position, retract 3 inches from the wall to save space and extend up to a maximum of 15.4 inches from the wall, saving you some valuable space and giving your home a clean, tidy appearance.#

The mounting bracket is exceptionally well made and strong. Installation was simple and easy, although the wall mount is considerably smaller than I had anticipated. They have extremely clear images that explain everything, but I assumed without reading the description that 18-inch studs would be supported. However, 18-inch studs are not supported since the bracket is not wide enough. My only complaint is that there really isn't any excuse not to make it a few inches bigger so that 12 in. and 18 in. studs could be accommodated.Thank goodness, I was able to attach this bracket to a pre-existing, non-articulating bracket before hanging it on the wall. It worked and appears to be what it should, but it would have been much simpler if it had been a tiny bit wider (or I had read the description closer ... I guess either would have worked)